Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
[SOLVED] EasyConnect X64 Windows Server 2008 R2
19-12-2016, 05:25 AM,
(This post was last modified: 19-12-2016, 06:00 AM by SweetBMW.)
Post: #1
|
|||
|
|||
[SOLVED] EasyConnect X64 Windows Server 2008 R2
Hi. Could use some help on getting this program to work on my server 2008 setup. I have installed DOT NET and all the other software that i usually install on my Win7 setup, but i think im missing some component to get this to work on my server rig.
This was working before, but had to format and now it doesnt work naymore. Cant remember what i did last time to make it work. Hoping for some tips from you guys Error log attached. In short: program starts just fine. and when i try to lock icom, the icom appears as reserved, but easyconnect reports error and i cant connect through icom. EDIT: Solved this by accessing the services snapin on the servers, and for some reason DOT NET 2.0 x32 and x64 was disabled. Enabled them and easyconnect works fine. At least for the time being |