Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ Renault Trafic EDC16C36
23-12-2016, 14:48 PM,
(This post was last modified: 04-01-2017, 11:37 AM by volavka.)
Post: #1
|
|||
|
|||
Renault Trafic EDC16C36
Hello mates,
Can some tell me what's wrong???? Yesterday I read Trafic 2.0 cdi EDC16C36 with Galletto by OBD , by OBD CAN* and FULL BDM read just in case with tempeture below 50'C. Saved Injectors Coding. Turn off EGR valve and wright back flash. Now CAR WONT START and have error DF026 cylinder 1 injector control circuit DF027 cylinder 2 injector control circuit DF028 cylinder 3 injector control circuit DF029 cylinder 4 injector control circuit I tried to recode injectors again with Clip but no luck. Always same error. Tried to put back all original but no luck. I did that type of car (megane,master,trafic) many times before with no problems. WHAT I DID WRONG???? Ecu is EDC16C36 , Bosch 0281 017 065 , soft 1037503114 -------------------------------------------------------------------------- * SOLVED * Be very carefull when working on old and coroded ECU's! Even might not be your fault and you didn't work nothing on board , IT IS ELECTRONIC sensitive on knocking,bending,temperature,humidity etc... |
|||
Reputation: +1 - ROD-BENDERS [+1] | |||
23-12-2016, 14:57 PM,
Post: #2
|
|||
|
|||
RE: Renault Trafic EDC16C36
Can you read inj codes with diagostic stuff and if so are they in correct order
|
|||
23-12-2016, 15:16 PM,
Post: #3
|
|||
|
|||
RE: Renault Trafic EDC16C36
|
|||
01-01-2017, 14:37 PM,
(This post was last modified: 01-01-2017, 14:38 PM by mohcin2.)
Post: #4
|
|||
|
|||
RE: Renault Trafic EDC16C36
Have to recode injectors codes before reading the ecu and if you read correct driver in fgetech fgetech made seconde file fore injectors codes i tested many times in renault edc16C36 NOW you have to check codes directly in injectors to see if its it the correct order and if its correct
|
|||
04-01-2017, 06:52 AM,
(This post was last modified: 04-01-2017, 06:56 AM by Selectronic.)
Post: #5
|
|||
|
|||
RE: Renault Trafic EDC16C36 *SOLVED*
(01-01-2017, 14:37 PM)mohcin2 Wrote: Have to recode injectors codes before reading the ecu and if you read correct driver in fgetech fgetech made seconde file fore injectors codes i tested many times in renault edc16C36 NOW you have to check codes directly in injectors to see if its it the correct order and if its correct Mate I allready did that before.Injectors are correctly coded.Even with wrong coded injectors engine must run.It will be in safe mode or rugh runing but can start. * SOLVED * Thak you mates for your help. Finaly I found whats wrong. It was bad capacitor near injector driver! Now everything working without errors |
|||
Reputation: +1 - ROD-BENDERS [+1] | |||
03-03-2017, 22:55 PM,
Post: #6
|
|||
|
|||
RE: Renault Trafic EDC16C36
Hello friend do you have picture which IC is for injector and which capacitor was faulty ?
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content