Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Winols 2.24
27-12-2016, 10:40 AM, (This post was last modified: 14-10-2018, 13:01 PM by ROD-BENDERS.)
Post: #1
Winols 2.24
Making checksums with Winols 2.24 tutorial

Peeps keep asking me how to make checksums for ecu files, so here is a little tutorial that should help all of you who dont know how to do this get started using winols.

Checksums are very important, get them wrong and car wont start or even worse yikes

1. If you havent installed winols 2.24 first, then do so, it can be found here on CT using the search button, this is not the search box wink

2. Open winols, and after you will see the empty working box, picture 1A. Now drag and drop your ecu file onto this box as in picture 1B. Now in picture 1, you can see there are 3 checksums that need correcting, winols will do this for you.

3. Follow the instructions in each picture 1a - 10 and this should get you started making checksum for your own files.

Included are two ecu files, Audi A6 3.0 lambda off ME7.1.1, one with "nochecks" (no checksum) and the other with "csok" (checksum ok).

Good luck all CT !

cheers


Attached Files Thumbnail(s)
                                               
petio 3,.0 asn_lambda_off_nochecks.rar
File Type: .rar
Downloaded: 912 times
Size: 316.57 KB

petio 3,.0 asn_lambda_off_nochecks_csok.rar
File Type: .rar
Downloaded: 714 times
Size: 316.57 KB


[Image: OxNUyuy.jpg]All VAG immo off or transfer - change Power Class up to & including WFS6 SHE -VAG DCM 6.2 3.7 - immo off also Bcm2, Elv, TC DSG DL381 DQ200 DQ250 DQ400 DQ500: Here:
AKL MQB - + A6-A7-A8-Touareg- generate sync key file - Many tools available = VAG ME7x LC AL NLS offline MOD tool + kg- BMW EDC16 IMMO TOOL + KG - BMW EWS remover tool + KG - med17 immo v2.3 - BMW-LAND ROVER-MINI EWS OFF TOOL + many more sw: PM me with what you need.
Reputation: +43 - volavka [+2] , dewons [+1] , blokers77 [+1] , Kenny [+1] , Marcos [+1] , mdanilo [+1] , xander20005 [+1] , carinae1995 [+1] , CHIKODIAG [+1] , pukymar [+1] , zmann [+1] , autoport [+1] , ombra [+1] , jenny123 [+1] , klonone [+1] , georgea [+1] , mariux0510 [+1] , Isooow [+1] , ValeS [+1] , JarsaR [+1] , Zamperl [+1] , goran_25 [+1] , GAlt [+1] , achraf [+1] , macako [+1] , vb23 [+1] , Richchee [+1] , maxeugen1 [+1] , kujto [+1] , blouzi [+1] , bogmarserwis [+1] , bruno efraim [+1] , kastanka [+1] , atomantmk [+1] , tortu25 [+1] , Vojno [+1] , petkowo [+1] , predacon [+1] , tripal [+1] , al70 [+1] , Roby15 [+1] , dema2 [+1]
Quote this message in a reply
[+] 306 users say Thank You to ROD-BENDERS for this post
13-01-2017, 01:47 AM, (This post was last modified: 13-01-2017, 02:10 AM by dadal.)
Post: #2
RE: Making checksums with Winols 2.24 tutorial
Very helpfully post mate, thanks,
I have winols2.24 but dont have chk plugin for edc15c7 fiat citroen
can someone share it please ?
Quote this message in a reply
13-01-2017, 07:51 AM,
Post: #3
RE: Making checksums with Winols 2.24 tutorial
FOR EDC15 use cks corrector or send file and i sistem for u
Quote this message in a reply
[+] 2 users say Thank You to alex68 for this post
15-01-2017, 21:47 PM, (This post was last modified: 15-01-2017, 21:52 PM by dadal.)
Post: #4
RE: Making checksums with Winols 2.24 tutorial
(13-01-2017, 07:51 AM)alex68 Wrote:  FOR EDC15 use cks corrector or send file and i sistem for u

Thanks Alex mate,
But I want to learn it,

Can someone help me with checksum, I want to use winols just for checksum, I have ver. 2.24
when I open new project winols shows this message..I m following all these steps but no luck
please tell me how to chk correting by winols ( dump is from ducato edc15c7)
need I plug in for this ecu ? I have read that chk can also be maded without plugin


Attached Files Thumbnail(s)
           
Quote this message in a reply
[+] 4 users say Thank You to dadal for this post
15-01-2017, 21:58 PM, (This post was last modified: 15-01-2017, 23:05 PM by ROD-BENDERS.)
Post: #5
RE: Making checksums with Winols 2.24 tutorial
Thanks Alex mate,
But I want to learn it,

Can someone help me with checksum, I want to use winols just for checksum, I have ver. 2.24
when I open new project winols shows this message..I m following all these steps but no luck
please tell me how to chk correting by winols ( dump is from ducato edc15c7)
need I plug in for this ecu ? I have read that chk can also be maded without plugin
[/quot

Dadal

1. First, drag and drop the original untouched file into winols in the same way as in the pictures. When it has finished loading the original file ...then
2. you can now drag and drop your modified file ontop of the original file you already loaded into winols.
3. Now you can follow the checksum procedure steps exactly as described in the pictures, correcting modfile checksums.

cheers

[Image: OxNUyuy.jpg]All VAG immo off or transfer - change Power Class up to & including WFS6 SHE -VAG DCM 6.2 3.7 - immo off also Bcm2, Elv, TC DSG DL381 DQ200 DQ250 DQ400 DQ500: Here:
AKL MQB - + A6-A7-A8-Touareg- generate sync key file - Many tools available = VAG ME7x LC AL NLS offline MOD tool + kg- BMW EDC16 IMMO TOOL + KG - BMW EWS remover tool + KG - med17 immo v2.3 - BMW-LAND ROVER-MINI EWS OFF TOOL + many more sw: PM me with what you need.
Reputation: +1 - dadal [+1]
Quote this message in a reply
[+] 23 users say Thank You to ROD-BENDERS for this post
16-01-2017, 06:36 AM,
Post: #6
RE: Making checksums with Winols 2.24 tutorial
Some flashing tool make the checksum automatically. but it will do no harm to do it first by winols, right?
Quote this message in a reply
16-01-2017, 06:50 AM, (This post was last modified: 16-01-2017, 07:31 AM by ROD-BENDERS.)
Post: #7
RE: Making checksums with Winols 2.24 tutorial
(16-01-2017, 06:36 AM)autoport Wrote:  Some flashing tool make the checksum automatically. but it will do no harm to do it first by winols, right?

It can do no harm making checksums first, some tools will make it necessary for you to do so.

[Image: OxNUyuy.jpg]All VAG immo off or transfer - change Power Class up to & including WFS6 SHE -VAG DCM 6.2 3.7 - immo off also Bcm2, Elv, TC DSG DL381 DQ200 DQ250 DQ400 DQ500: Here:
AKL MQB - + A6-A7-A8-Touareg- generate sync key file - Many tools available = VAG ME7x LC AL NLS offline MOD tool + kg- BMW EDC16 IMMO TOOL + KG - BMW EWS remover tool + KG - med17 immo v2.3 - BMW-LAND ROVER-MINI EWS OFF TOOL + many more sw: PM me with what you need.
Quote this message in a reply
[+] 4 users say Thank You to ROD-BENDERS for this post
22-01-2017, 20:34 PM, (This post was last modified: 21-06-2017, 16:54 PM by ROD-BENDERS.)
Post: #8
RE: Making checksums with Winols 2.24 tutorial
@ROD-BENDERS
I have tried your method,,it works perfect !! finding plugin was very hard
thanks again mate smile

@ Alex
software chk corrector works also good, ( on edc15.xx )
I have compared it wiht dump winols, and they are same
thanks for info smile
Reputation: +1 - ROD-BENDERS [+1]
Quote this message in a reply
[+] 2 users say Thank You to dadal for this post
23-01-2017, 16:12 PM, (This post was last modified: 25-01-2017, 06:26 AM by autoport.)
Post: #9
RE: Making checksums with Winols 2.24 tutorial
On this file, even if I export with checksum corrected , it will ask again when I open the exported file again....

LATE EDIT: seems that is a problem with my winols... the exported files are saved with no cs corrected. not solved yet.
Quote this message in a reply
02-02-2017, 17:39 PM, (This post was last modified: 18-04-2017, 11:55 AM by Clusters.)
Post: #10
RE: Making checksums with Winols 2.24 tutorial
(23-01-2017, 16:12 PM)autoport Wrote:  On this file, even if I export with checksum corrected , it will ask again when I open the exported file again....

LATE EDIT: seems that is a problem with my winols... the exported files are saved with no cs corrected. not solved yet.

some modified versions of winols ( on forums ) have problem with checksum,( and other bugs) Im also looking for a better stable version
Quote this message in a reply
[+] 2 users say Thank You to dadal for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
00Windows WinOls 4.51 VMWare Win 7 mesrine_29 0 106 19-03-2024, 16:48 PM
Last Post: mesrine_29
00Windows Winols checksum plugin OLS294 AutoUnit 1 118 10-03-2024, 19:54 PM
Last Post: BmwMerc
00Windows WinOLS 5.54 CenturionM 3 862 07-03-2024, 17:18 PM
Last Post: wrp_199
  WinOLS (Demo) Save Files baatouz 1 475 27-09-2023, 05:44 AM
Last Post: wjgud123
  winols 5 DavidT 2 787 09-09-2023, 15:51 PM
Last Post: wjgud123
  WINOLS VMWARE COMPILATION 2.24 4.26 4.51 4.70 srzar 3 1,461 15-08-2023, 23:00 PM
Last Post: domelec
  Winols 2.24 VM XP ROD-BENDERS 7 5,231 01-08-2023, 07:46 AM
Last Post: ROD-BENDERS
XZBMW Winols Damos edc16 johann74270 1 620 11-07-2023, 06:02 AM
Last Post: srzar
XZBMW WinOLS johann74270 1 623 27-06-2023, 09:11 AM
Last Post: bleXER
  WinOLS 4.26 With 66 Plugins And Checksum VMware free senci_24 4 3,582 16-06-2023, 11:08 AM
Last Post: leschi

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content