Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
CIC from e90 retrofit into e60
29-12-2016, 21:53 PM,
Post: #1
|
|||
|
|||
CIC from e90 retrofit into e60
Hello all,
I've heard that CIC taken from e90 is possible to retrofit into e60. I have a friend who has e90 CIC and want's to install it into e60. He already bought the control panel with 8 buttons for e60 and retrofit emulator(can filter) and what we don't know is how to flash CIC with which ZUSB to make it work with e60 ihka and all other modules. It does not work only with coding, for sure it must be flashed. I would be very thankful if someone share info. Thanks. BMW Remote Services
ISTA OFFLINE License |
|||
30-12-2016, 08:36 AM,
Post: #2
|
|||
|
|||
RE: CIC from e90 retrofit into e60
Flash #062 (gateway) with zusb 9273169 with winkfp
|
|||
15-01-2017, 12:53 PM,
Post: #3
|
|||
|
|||
RE: CIC from e90 retrofit into e60
(30-12-2016, 08:36 AM)X-treme Wrote: Flash #062 (gateway) with zusb 9273169 with winkfp Only ICOM pouring, optics. The road is life !
|
|||
15-01-2017, 15:47 PM,
Post: #4
|
|||
|
|||
RE: CIC from e90 retrofit into e60
(29-12-2016, 21:53 PM)lynxbmw Wrote: Hello all, Flash the complete CIC, but load E60 daten when flashing the 62 adress, and load E90 daten when flashing the 63 and A0. This is how ive done it plenty of times, other ways ive read have caused errors. Flashing order is 63, 62, A0. AFter done flashing, code it to your vehicle.(or his in this case.). Good luck. PS: Only flash with ICOM!!! Dont use USB cable as this will brick the unit. 63,62 and A0 can all be flashed with MOST_ASYNC_Ab625 |
|||
07-10-2018, 16:24 PM,
Post: #5
|
|||
|
|||
RE: CIC from e90 retrofit into e60
Hello friends, today, after about five years, I corrected someone who sold me CIC saying that everything is fine, but it was not and thanks to SweetBMW I discovered that you can change the gateway for E60.
It was enough to change the soft in the gateway for E60 I confirm that I can, I did the gateway itself and the screen was on the bootloader but after rebooting the gateway everything started up properly and works as it should. Now it remains to update the software and unlock the navigation because I currently have an old soft 923 ..... and unlocked script navigation. Best Regards. AutoKodowanie - coding - programming - navigations - retrofit.
|
|||
07-10-2018, 17:20 PM,
Post: #6
|
|||
|
|||
RE: CIC from e90 retrofit into e60
do you have idea where to get e60 faceplate for cic?
|
|||
08-10-2018, 07:16 AM,
Post: #7
|
|||
|
|||
RE: CIC from e90 retrofit into e60
(07-10-2018, 17:20 PM)jararak Wrote: do you have idea where to get e60 faceplate for cic? Buy new in BMW Service Part nr: 65839206067. But remember that E90 CIC case is a bit different and you have to glue faceplate to E60 trim to fix it in place. I did it already. CIC from japan E90 converted into E60 and it's working fine. Only I have to check why my radio has weak reception. |
|||
08-10-2018, 07:38 AM,
Post: #8
|
|||
|
|||
RE: CIC from e90 retrofit into e60
No need for glue. The front part of CIC top can be moved out. Just drill out the old fittings and pop river in place. Total distance 17mm. Fits perfectly and makes for a more factory look than other shot solutions I’ve seen.
| BimmerFiks AS | Instagram | |
|||
08-10-2018, 08:15 AM,
Post: #9
|
|||
|
|||
RE: CIC from e90 retrofit into e60
|
|||
08-10-2018, 10:32 AM,
Post: #10
|
|||
|
|||
RE: CIC from e90 retrofit into e60
(08-10-2018, 07:16 AM)Krysiaman Wrote:(07-10-2018, 17:20 PM)jararak Wrote: do you have idea where to get e60 faceplate for cic? Maps are working on japan unit? What ZSUB nr what u used? I have japan cic and poor fm reception too. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content