Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Icom next can't connect e-sys
|
03-01-2017, 20:26 PM,
Post: #1
|
|||
|
|||
Icom next can't connect e-sys
Hello,
I have recently bought an original Icom next and i cannot connect to cars via e-sys. Do i have to configure something? Also can somebody tell me where can i find a user manual for icom next? Thanks, Art D  Don’t forget to give Thanks & Rep if my post helped you!!! |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
03-01-2017, 21:02 PM,
Post: #2
|
|||
|
|||
RE: Icom next can't connect e-sys
(03-01-2017, 20:26 PM)darthur90 Wrote: Hello, To connect with esys by icom next You have to for instance with ITOOL Radar reserve the icom ip adres and then connect to the car |
|||
|
|
|
03-01-2017, 21:05 PM,
Post: #3
|
|||
|
|||
|
RE: Icom next can't connect e-sys
I have itool radar installed. I reserved the icom, and when i try to connect the ip adress is automatically inserted under icom/ ethernet, then i hit connect and it says connection failed.
(03-01-2017, 21:02 PM)arak143 Wrote:(03-01-2017, 20:26 PM)darthur90 Wrote: Hello, Don’t forget to give Thanks & Rep if my post helped you!!! |
|||
|
|
|
03-01-2017, 22:53 PM,
(This post was last modified: 03-01-2017, 23:00 PM by cryptocar.)
Post: #4
|
|||
|
|||
RE: Icom next can't connect e-sys
(03-01-2017, 21:05 PM)darthur90 Wrote: I have itool radar installed. I reserved the icom, and when i try to connect the ip adress is automatically inserted under icom/ ethernet, then i hit connect and it says connection failed. Are you using the correct port for ICOM? (50160) Firewalls open? Latest Firmware installed on your ICOM? (http://cartechnology.co.uk/showthread.php?tid=17603) Should look like this, but with your ICOM's IP. ![[Image: qiQqbYU.png]](https://i.imgur.com/qiQqbYU.png)
If this post helped you in anyway please use the thanks and/or REP buttons down here.
Thanks! |
|||
|
|
|
03-01-2017, 23:02 PM,
Post: #5
|
|||
|
|||
|
RE: Icom next can't connect e-sys
I will check if the port is open, but the icom is working perfectly with ista+ and ista /p. The ip address is showing up exactly the same as yours. I dont't know what kind of firmware does the icom have. I bought it 3 days ago. How can i check the firmware version? Never had an icom before. Until now i was coding cars with an enet cable.
Thanks in advance! Art D (03-01-2017, 22:53 PM)cryptocar Wrote:(03-01-2017, 21:05 PM)darthur90 Wrote: I have itool radar installed. I reserved the icom, and when i try to connect the ip adress is automatically inserted under icom/ ethernet, then i hit connect and it says connection failed. Are you using the correct port for ICOM? (50160) Firewalls open? Latest Firmware installed on your ICOM? Should look like this, but with your ICOM's IP. [/quote] Don’t forget to give Thanks & Rep if my post helped you!!! |
|||
|
|
|
04-01-2017, 01:30 AM,
(This post was last modified: 04-01-2017, 01:31 AM by Loliceman.)
Post: #6
|
|||
|
|||
|
RE: Icom next can't connect e-sys
You got the "ICOM Next" from china reseller?
Let me guess, the ad says "New generation of ICOM"? If it does, chances are likely that you might be holding a clone ICOM A2 with a ICOM Next casing.. If this is true, I would suggest you to take contact with seller and question him. If its a genuine ICOM Next and you want to update it, I have a link for the update procedure, keep in mind that attached link is to some random OBD blog, and I don't own an ICOM Next so I cannot test if its the right procedure or not. Try at your own risk! |
