Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Help!BMW DSC UPDATA PROBLEM
11-01-2017, 17:50 PM, (This post was last modified: 11-01-2017, 17:52 PM by siuball.)
Post: #1
XZBMW  Help!BMW DSC UPDATA PROBLEM
Hi guys,

My car is 2006 E90 330i MT,

After updata to Sp-datenV57(Winkfp), I had the following error codes:
• Error Code 005DD2 - DSC: Hydraulic unit: adjustment, DSC unit (valves)
• Error Code 005DD0 - DSC: Hydraulic unit: adjustment, DSC unit (valves)
AND 5D5Etearstearstears

How can i dotearstearstears

I had to try this plan
===============================================
After my research every forum says use SSS Progman or NCS Expert. So I decided to use NCS Expert first of all as it is most simple to use.
When you have NCS Expert loaded with your car plugged in and ignition on. Select “File > Load profile > ExpertMode > OK. Then select your chassis by selecting F1, then selecting F3.

NCS Expert.jpg

NCS Expert2.jpg

It then asks which computer we want to code. Select one of the available options like CAS or EWS or LCM. You then have to select “F6” to go back. This will then allow you which ECU you want to code.

NCS Expert3.jpg

So for this case, we want the DSC module. So select F4 and select it. Then select F2 job select, and make sure the job name is on SG_CODIEREN and press okay.

Then select F3 to process the car. This in theory is how the new ECU is coded to the car. I however had no luck with this method.

I then decided to use SSS Progman. This is a very simple piece of software which again pretty much does the coding for you.

When you load the software, select New Session. Then click your interface and continue. Then select your car and model. Once loaded, click on ‘Load SW’. It will then ask you if you have replaced modules, select yes for the new pump. The software will then list all the modules on your vehicle. Select DSC to code it. After clicking continue, the software will create a measure plan and try to process the recoding.

However at this stage, my car failed as the software told me I had the wrong pump for the car and told me to replace the unit! SSS Progman will only work if you have the exact pump the car should have!

After more research I discovered I could code my cars VIN number into the DSC pump by using some software called Tool32.

Tool32.jpg

Once you have plugged your car in and turned your ignition on, press F3 and choose your ABS module. For me this was 'dsc_87.prg'. This will then load a series of jobs. To code your VIN number into the ABS pump, look for the options called 'c_fg_schreiben' and 'c_fg_auftrag' in the left column.

Once you find them, select 'c_fg_schreiben' and at ‘Argument’ type your car 17characters VIN and at the end put 1. So for example if your VIN is WBAVA71030VA22222 you will put 1 at the end and that should look like WBAVA71030VA222221

Once you have typed it, press F5 and it's done. You should then select 'c_fg_auftrag' (If you have it) and press F5.

This however did not work for me! After further research, I then discovered you have to calibrate your steering angle first to code in your VIN number. This can also be done in Tool 32, so repeating the above processes in Tool32, then select "lenkwinkel dsc abgleichen" (to select steering angle calibration) in the left column. Make sure your steering wheel is straight and type in your VIN into the arguments section again. Press F5 and your steering angle calibration, and VIN programming should be complete.
==========================================
But not oktearstearstears How can i do?shake
Quote this message in a reply
11-01-2017, 17:57 PM,
Post: #2
RE: Help!BMW DSC UPDATA PROBLEM
Start or get ista, and do adjustment of dsc unit.
Quote this message in a reply
[+] 2 users say Thank You to SweetBMW for this post
11-01-2017, 18:07 PM,
Post: #3
XZBMW  RE: Help!BMW DSC UPDATA PROBLEM
(11-01-2017, 17:57 PM)SweetBMW Wrote:  Start or get ista, and do adjustment of dsc unit.

i have ista,how i can do?
Quote this message in a reply
11-01-2017, 18:52 PM,
Post: #4
RE: Help!BMW DSC UPDATA PROBLEM
See attached pic    
Quote this message in a reply
[+] 4 users say Thank You to SweetBMW for this post
11-01-2017, 18:55 PM,
Post: #5
RE: Help!BMW DSC UPDATA PROBLEM
(11-01-2017, 18:07 PM)siuball Wrote:  
(11-01-2017, 17:57 PM)SweetBMW Wrote:  Start or get ista, and do adjustment of dsc unit.

i have ista,how i can do?


Do you have Ista-D or Ista-P?
With Ista D you go to Service Functions, then Suspension and look for DSC Options.
With Ista P you have to go to postprocessing (dont know the exact english name)
Quote this message in a reply
[+] 2 users say Thank You to DD3 for this post
11-01-2017, 19:07 PM,
Post: #6
RE: Help!BMW DSC UPDATA PROBLEM
(11-01-2017, 18:55 PM)DD3 Wrote:  
(11-01-2017, 18:07 PM)siuball Wrote:  
(11-01-2017, 17:57 PM)SweetBMW Wrote:  Start or get ista, and do adjustment of dsc unit.

i have ista,how i can do?


Do you have Ista-D or Ista-P?
With Ista D you go to Service Functions, then Suspension and look for DSC Options.
With Ista P you have to go to postprocessing (dont know the exact english name)


Dont have to use ISTA\P for this, if he had updated with ISTAP (which he hasnt) it would have done this job automatically. He updated with WinKFP
Quote this message in a reply
[+] 2 users say Thank You to SweetBMW for this post
11-01-2017, 19:09 PM, (This post was last modified: 11-01-2017, 19:10 PM by siuball.)
Post: #7
RE: Help!BMW DSC UPDATA PROBLEM
(11-01-2017, 18:55 PM)DD3 Wrote:  
(11-01-2017, 18:07 PM)siuball Wrote:  
(11-01-2017, 17:57 PM)SweetBMW Wrote:  Start or get ista, and do adjustment of dsc unit.

i have ista,how i can do?


Do you have Ista-D or Ista-P?
With Ista D you go to Service Functions, then Suspension and look for DSC Options.
With Ista P you have to go to postprocessing (dont know the exact english name)

I have done, but still not, the error code is still theretearstearstears


Attached Files Thumbnail(s)
   
Quote this message in a reply
11-01-2017, 19:27 PM,
Post: #8
RE: Help!BMW DSC UPDATA PROBLEM
Did you try adjustment of DSC Unit too?
Try to start Engine, turn steering wheel full right then full left then straight and then drive for min. 100meters. This should adjust it in case when your software dont adjust it right for some reason
Quote this message in a reply
[+] 2 users say Thank You to DD3 for this post
11-01-2017, 22:08 PM, (This post was last modified: 11-01-2017, 23:24 PM by Jumper.)
Post: #9
RE: Help!BMW DSC UPDATA PROBLEM
1. Flash winkfp
2. Coding DSC with NCS
3. Steering angle sensor adjustment
4. Adjustment complete DSC unit, Not just sensor!
5. Install RPA
6. Clear error


I wish you success


Attached Files Thumbnail(s)
       
Quote this message in a reply
[+] 2 users say Thank You to Jumper for this post
12-01-2017, 07:59 AM,
Post: #10
RE: Help!BMW DSC UPDATA PROBLEM
(11-01-2017, 22:08 PM)myfirst1er Wrote:  1. Flash winkfp
2. Coding DSC with NCS
3. Steering angle sensor adjustment
4. Adjustment complete DSC unit, Not just sensor!
5. Install RPA
6. Clear error


I wish you success

thank you for all,i fixed my problemenjoyenjoyenjoyrockrock
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Problem Retrofit electrified steering column on the G31 LCI smercki 5 117 23 minutes ago
Last Post: smercki
XZBMW X5 G05 with MGU and ATM: GPS problem david357 6 601 1 hour ago
Last Post: david357
  BMW e39 530d 2001 problem after MAF change boweld11 0 28 17-03-2024, 10:54 AM
Last Post: boweld11
XZBMW BMW EVO ATM retrofit problem Pedrom92 10 1,230 27-02-2024, 18:19 PM
Last Post: user_530d
XZBMW Problem HUD cico252 12 345 22-02-2024, 17:20 PM
Last Post: cico252
  G11/G12 LCI Tail lights coding - CRC problem OBDSolutions 8 1,274 21-02-2024, 20:38 PM
Last Post: kklobo
  Problem with ACSM5 faults BMW G30 ImmBoo 5 354 17-02-2024, 18:59 PM
Last Post: ImmBoo
XZBMW G30 Entrynav2 - rear camera retrofit problem Krysiaman 17 933 13-02-2024, 21:44 PM
Last Post: Airbus
XZBMW problem with flashing CHAMP2 module (the programming dependencies are not correct) azwgh 17 530 11-02-2024, 19:39 PM
Last Post: azwgh
  Problem with cas4+ and Key ADD with VVDI budddyyy 11 612 10-02-2024, 07:23 AM
Last Post: body1982

Forum Jump:


Users browsing this thread:
3 Guest(s)

Return to TopReturn to Content