Possibly Related Threads…

***siuball*** · (This post was last modified: 12-01-2017, 07:57 AM by siuball.)

Hi guys,
My car type is BMW 2006 E90 330i MT,i installed M performance Brake 6Pot(Front) 2Pot (Rear), which product do i need to purchase for changing my Voltage
(how much Voltage).

And an all guidence from step to step would be very nice.

Regards wink

***inspi1981*** · 12-01-2017, 08:48 AM,

What do You mean with "changing my Voltage "

***siuball*** · (This post was last modified: 12-01-2017, 09:32 AM by siuball.)

(12-01-2017, 08:48 AM)inspi1981 Wrote: What do You mean with "changing my Voltage "

How to change the m performance brake voltage

(12-01-2017, 08:48 AM)inspi1981 Wrote: What do You mean with "changing my Voltage "

And i need to know how what is the right number of the voltage for my m performance brake?

***Node*** · (This post was last modified: 12-01-2017, 10:04 AM by Node.)

Voltage is a measure of electrical tension. How it is related to brakes evades me... I was sure brakes are operated by hydraulics and not electricity, but maybe I'm wrong smile

***siuball*** · 12-01-2017, 10:14 AM,

(12-01-2017, 10:02 AM)Node Wrote: Voltage is a measure of electrical tension. How it is related to brakes evades me... I was sure brakes are operated by hydraulics and not electricity, but maybe I'm wrong

thank you,how can i do to perfect setting to my m performance brake?

***BMW888*** · 12-01-2017, 14:21 PM,

(12-01-2017, 07:57 AM)siuball Wrote: Hi guys,
My car type is BMW 2006 E90 330i MT,i installed M performance Brake 6Pot(Front) 2Pot (Rear), which product do i need to purchase for changing my Voltage
(how much Voltage).

And an all guidence from step to step would be very nice.

Regards

Try add VO 2NH then VO code DSC. If FA accept this VO. You will get bigger brake force after coding.

***siuball*** · 12-01-2017, 15:20 PM,

(12-01-2017, 14:21 PM)BMW888 Wrote:
(12-01-2017, 07:57 AM)siuball Wrote: Hi guys,
My car type is BMW 2006 E90 330i MT,i installed M performance Brake 6Pot(Front) 2Pot (Rear), which product do i need to purchase for changing my Voltage
(how much Voltage).

And an all guidence from step to step would be very nice.

Regards

Try add VO 2NH then VO code DSC. If FA accept this VO. You will get bigger brake force after coding.

how can i do to add vo 2NH,what step i need?

***BMW888*** · 13-01-2017, 01:27 AM,

Use NCSExpert.

NCS_Changing_the_Vehicle_Order_CAS.pdf
File Type:
Downloaded:	50 times
Size:	1.56 MB

***siuball*** · 13-01-2017, 07:40 AM,

(13-01-2017, 01:27 AM)BMW888 Wrote: Use NCSExpert.

Thank you,but which one "attribute" is my choose?
And then what should i do?

***masa52*** · 13-01-2017, 10:15 AM,

Read the forum all is on it!!

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Bmw G31 retrofit Mgu id7 atm problem	intranet	20	2,367	10 hours ago Last Post: smilo
	bmw e70 parking brake actuator pinout diagram	psilocin	1	43	24-04-2024, 06:59 AM Last Post: Node
	M performance brake DSC2 SBRE coding	Ckh091020	3	217	22-04-2024, 12:58 PM Last Post: Ckh091020
	NBT EVO Connected Drive problem after update I-Level	SkeYT	47	4,712	22-04-2024, 11:44 AM Last Post: kwat
	Brake Pads Warning Disable -Racing purpose	marcdts	2	141	19-04-2024, 19:59 PM Last Post: bmchicago
	BMW E60 coding problem	GarageX	8	355	02-04-2024, 10:07 AM Last Post: GarageX
	E60 DSC unit, Cruise+brake vs ACC2 stop and go	GoNz0-	4	189	29-03-2024, 09:11 AM Last Post: GoNz0-
	Bmw 5,f10 radio problem	RobertRexhaj	3	156	28-03-2024, 18:47 PM Last Post: Unspec
	ISTA launcher problem	Red_bean_bun	1	261	26-03-2024, 05:11 AM Last Post: 2013m5
	Dme Cas synchronization Problem	donjuan020	3	269	25-03-2024, 21:55 PM Last Post: BmwMerc

Contact Us