Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

M Performance Brake Problem
12-02-2017, 13:32 PM,
Post: #21
RE: M Performance Brake Problem
(12-02-2017, 06:57 AM)Mcrae Wrote:  Did you really have the FA SPBR when you make an readout now? I just added SPBR and it is working! No need to code the dsc module.
I can try to write down a small guide how I did it.

Hi Mcrae,

Yes I have the SPBR into the FA now when I read it from the car.
Look into the atached image.

The brake feels spongy, and the travel is long compared with the stock brakes. tears

Thanks in advance!


Attached Files Thumbnail(s)
   
Quote this message in a reply
12-02-2017, 13:57 PM,
Post: #22
RE: M Performance Brake Problem
(12-02-2017, 13:32 PM)jaramillo Wrote:  
(12-02-2017, 06:57 AM)Mcrae Wrote:  Did you really have the FA SPBR when you make an readout now? I just added SPBR and it is working! No need to code the dsc module.
I can try to write down a small guide how I did it.

Hi Mcrae,

Yes I have the SPBR into the FA now when I read it from the car.
Look into the atached image.

The brake feels spongy, and the travel is long compared with the stock brakes. tears

Thanks in advance!


Coding wont change how they feel, just how DSC operates when activated

Have you bled them properly ?
Maybe bleed the whole DSC system with the full ISTA procedure.

There is also a reason the factory fitted M Sport brakes get a different master cylinder. These will not feel the same without it.
Reputation: +1 - jaramillo [+1]
Quote this message in a reply
[+] 2 users say Thank You to BMWScoops55 for this post
12-02-2017, 19:06 PM,
Post: #23
RE: M Performance Brake Problem
Feeling of the Brakes is well different with that! You need less force to get the same result as without!
But you are right, normally there should be also any changes in the DSC!

@Jaramillo
Could it be there is some air in the System?
Pump the Brakes, release, wait a few seconds and hit the Brake one more, if the way of travel is now much more than befor, you have air in the system!
Quote this message in a reply
[+] 2 users say Thank You to Mcrae for this post
13-02-2017, 14:16 PM,
Post: #24
RE: M Performance Brake Problem
Assume that brake bleeding doing well, there are some noticeable feel after added SPBR and VO code to DSC ecu.
Upper half of brake travel won’t change, but the bottom half travel you will find brake pedal harder in feel with increased brake force.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW Bmw 5,f10 radio problem RobertRexhaj 3 65 2 hours ago
Last Post: Unspec
  E60 DSC unit, Cruise+brake vs ACC2 stop and go GoNz0- 0 34 Yesterday, 16:58 PM
Last Post: GoNz0-
  ISTA launcher problem Red_bean_bun 1 156 26-03-2024, 05:11 AM
Last Post: 2013m5
  Dme Cas synchronization Problem donjuan020 3 202 25-03-2024, 21:55 PM
Last Post: BmwMerc
  BMW e39 530d 2001 problem after MAF change boweld11 3 103 24-03-2024, 22:44 PM
Last Post: SkeYT
XZBMW Entrynav2 Maps Problem Chillmeister 3 285 24-03-2024, 17:18 PM
Last Post: Chillmeister
  For anyone having problem with ICOM NEXT FW update via ISTA+. ImmBoo 16 3,898 24-03-2024, 11:29 AM
Last Post: Twointje
  Battery lead positive underfloor problem da.2022 10 196 24-03-2024, 09:38 AM
Last Post: pupu144
  Problem Retrofit electrified steering column on the G31 LCI smercki 12 328 22-03-2024, 12:55 PM
Last Post: Node
XZBMW X5 G05 with MGU and ATM: GPS problem david357 8 785 19-03-2024, 21:25 PM
Last Post: Mwahab

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content