Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

What brand china tool is good for reading mcu
13-01-2017, 17:02 PM,
Post: #1
What brand china tool is good for reading mcu
Hi guy.. I just start to learning how to reading and programming mcu.. like Honda airbag module. ;, but i still don has reader mcu.. can tell me which brand and what model can read and write mcu .. because I need to buy which brand better in china tool ,, hi guy I waiting ur answer.. thankkkkk
Quote this message in a reply
13-01-2017, 17:49 PM,
Post: #2
RE: What brand china tool is good for reading mcu
Xprog good to start thumbsup

BEST CHIPTUNING SERVICE BY Zenter Performance  [Image: congrats.gif]

Contact Skype: zenter-88 
Facebook: https://www.facebook.com/ZenterPerformance
--------------------------------------------------------------------------------------------------------------

highest Quality ChiPTuninG Files BY PTF Team https://performance-tuningfiles.com/
POWER BY TECHNOLOGY drive

--------------------------------------------------------------------------------------------------------------
BEST CHIPTUNING SERVICE BY Jurebv   [Image: yes.gif]
Contact Skype: live:jure.coric_1
https://files.tuning-makarska.com/
--------------------------------------------------------------------------------------------------------------
-
IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE   
In progress TUNING STAGE1/DPF/SCR/EGR/TVA/FLAP/ START STOP OFF Software 

WHAT'S NEWS !
-Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG 
-Citroen DS5 Steering lock Renew/Write Code by dumps
-Passat CCM Repair corrupted dump succes
-VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED !
-IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X
-Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS


-=[Full WinOLS/ECM Titanium User] =-

Remember!  dirty hands  are a sign of clean money 

шшш.αήkαbôôτ.Ćô.цk
Visit this user's website
Quote this message in a reply
[+] 2 users say Thank You to volavka for this post
13-01-2017, 18:04 PM,
Post: #3
RE: What brand china tool is good for reading mcu
Correct Xprog M 5.0 very good to start up with
Quote this message in a reply
14-01-2017, 06:22 AM,
Post: #4
RE: What brand china tool is good for reading mcu
Hello with all my respect to all members and
Masters in this job
My advise to you as a beginer like me buy original with pictures
How to connect in circuit reading
And one programmer never enough
I learned this here on this forum
Thanks all

[Image: OxNUyuy.jpg]  time  Always new stuff to learn  biggrin
Skype: raffy.haddad
File services : multi brand ecu immo off , VW solutions : immo transfer immo off ,  pcr 2.1 immo , BMW EDC16 IMMO OFF , ....
Yamaha smart key supply pin code from dump ( TMAX , XMAX  ) 
Chevrolet simens sirus D3x D4x D5x
delphi MR 140  IMMOOFF


I DO MY BEST HERE TO HELP YOU MAKE SOME $$$ BUT ON PRIVATE IS DIFFERENT 
Members who not report back they're name will be black listed on my list









Quote this message in a reply
15-01-2017, 00:48 AM,
Post: #5
RE: What brand china tool is good for reading mcu
(14-01-2017, 06:22 AM)raffy haddad Wrote:  Hello with all my respect to all members and
Masters in this job
My advise to you as a beginer like me buy original with pictures
How to connect in circuit reading
And one programmer never enough
I learned this here on this forum
Thanks all
Yes we need some easy programmer with briefly detailed information to begin with.

Sent from my HUAWEI RIO-L01 using Tapatalk
Quote this message in a reply
15-01-2017, 07:30 AM, (This post was last modified: 15-01-2017, 07:33 AM by chong5195.)
Post: #6
RE: What brand china tool is good for reading mcu
(13-01-2017, 17:49 PM)volavka Wrote:  Xprog good to start thumbsup

xprog i has aready .. can ready mcu???.can ready without soldering ??

(13-01-2017, 18:04 PM)panyauto Wrote:  Correct Xprog M 5.0 very good to start up with

how to read using xprog to read mcu .. without soldering out the mcu??
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
0Immo NEW EASY IMMO DOCTOR 2.1 Multi Immo Tool.+ KG ROD-BENDERS 44 10,067 17-03-2024, 14:52 PM
Last Post: kar407
  OPEL grandland Med17.4.4 need pinout and recomand tool to read fadyeid 0 45 11-03-2024, 16:12 PM
Last Post: fadyeid
  Key Programming Tool koziol 1 126 06-03-2024, 07:22 AM
Last Post: TKservice
0Immo Car-Edit tool - dash ecu bsm srs immo ROD-BENDERS 31 8,396 05-03-2024, 21:01 PM
Last Post: keyzex
  VAG IMMO OFF TOOL for free josef1708 6 1,821 03-03-2024, 09:42 AM
Last Post: josef1708
KOpel Upa Script to read Opel Immo Pin 29F400 or tool meszol 0 97 08-02-2024, 12:09 PM
Last Post: meszol
  Tool to make BMW keys? Spirit5676 1 184 26-01-2024, 21:54 PM
Last Post: Inerceptor
0Immo LATEST IMMO SERVICE TOOL 1.2 - 2017 volavka 554 177,416 12-01-2024, 08:54 AM
Last Post: mars2moon
HPorshe 2010 Porsche panamera Continental SDI6 reading by X-Prog iii pc drhg 2 181 01-01-2024, 19:01 PM
Last Post: drhg
  Mercedes Vito W639 iprog scripts for China clone CID_Dave 0 162 23-12-2023, 21:05 PM
Last Post: CID_Dave

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content