[B66B]

Hi @all,

My MMI is 3G+ with Firmware HN+R_EU_AU_K0942 and new Map 6.24.2.
Activated with Vlasoff (No Mac Adress needed).
In the first Post there is a new FW P(Production)0960. Is this available?
If yes, can i use after update Keldo or is till yet no Activator for this new FW?

[maciejm81]

Guys,
I still have problem with Google Maps.

I have found at the German website the manual how to enable WLAN and Google Maps at 3GP (I'm not sure but think that it is manual for those witout SIM card reader I guess). There was a script, I've downloaded the script to SD card and after that I've changed some options in green menu in diagnose menu (uncheck some option with are set off as standard and to activate something like "NAD" and so on). After MMI reset I saw new icon in MMI menu like Audi Connect and Google Maps option in Nav settings. But still even with SIM card inside the reader it does not work. In telephone setting I cannot enter data connection submenu because is all the time in Grey color and telephone is still searching for network...
Do you think that SIM card reader can't read my nano card? Or maybe I need to install modem and router via WLAN to have Google Maps? Any idea?

[talenat]

Is this map for 3G DVD basic or 3GP hdd?

[benyclaudiu]

AUDI TRAFFIC ON-LINE
Legal notice:

Navigation Function Traffic on-line - is the ability to be aware of the traffic situation in the city 24 hours a day.
The option is available for vehicles manufactured after November 11, 2013 (except models Audi R8 and Audi TT), and only for the following regions:
Moscow, St. Petersburg and the region, Yekaterinburg and the region, Greater Sochi. Terms of the function:
• installed in the a / m optional MMI Navigation plus;
• installed in the a / m Audi connect option;
• sim-card with the tariff plan that supports Internet access.

Activating the function in the MMI:
To activate this feature, you must:

1. View menu, green engineering (how to activate the engineering menu, see. In the relevant section)
diagnose-> coding-> internal_modules_1 + 2:
remove crows with all items containing "Online" is displayed.
for transmission to the VIN AUDI server to obtain a license,
you need to remove the checkbox in front of Authentification OFF
nav-> trafficonline
2. To activate the plug points in the MMI menu, you need a cord in the MMI section, change the value in the adaption channel:

[5F - Electronics awareness] -> [10 - Adaptation] -> [Channel 69] - to add 32768 to your value, I had a 15 - respectively 15 + 32768 = 32783, then Test-> Save.

License Activation:

To use the service "Traffic info online" must first activate it in the car.
Since then, the validity period of this service is limited to 36 months
(If it has been activated within 6 months from the date of delivery of the car;
otherwise the validity of the right to use correspondingly reduced.

To activate a license, you must click on the MMI keypad or the INFO button in the navigation mode, press the top right "information" and further:
Information -> Settings -> License for travel information online -> Activate traffic information online
Then Audi will request to the server to verify your car with the possibility of granting the license.
If activation is possible, you will see the following inscription, which indicates successful reception of the license with a term of its action, and in the lower left corner will be a treasured inscription ONLINE:

If activation is not possible on your car, then the following appears:
Unfortunately, the aforementioned label says that you license denied for several reasons, one of the main are:
- Vehicle c release date to 2011
- MMI 3G Plus c SIM is not installed from the factory
- Has been more than 3 years from date of manufacture
- And so on, come under the new rules:

! "Attention In July 2015, AUDI has introduced new rules for activating the option ONLINE plugs (initial request) - to activate the plug in the normal mode is possible in 99.9% only in vehicles with factory staffed 3G Navigation Plus system with SIM option, GOOGLE.
So as the car should not be older than 3 years. © r_Q7 ".

To date, a decision on the activation of traffic jams Audi Traffic On-Line, in the case of official refusal, provides partner club.

Using:

To activate caps display functions, as well as a route taking into account traffic jams,
necessary to make the inclusion of 4 points in the MMI menu:
1.Informatsiya-> Traffic data of online> set the switch to ON

2. Set the map display mode in the "Motion"

Navigatsiya-> Settings-> Picture cards-> movement
3. Insert paragraph:
Navigatsiya-> Settings-> Criteria marshruta-> Dynamic detour traffic jams

4. Include items:
Navigatsiya-> Settings-> Maps Contents:
- Free transport stream
- Delays in traffic
- Traffic Information
after the above points the route will be routed based on traffic jams,
and icons appear on the map of motion difficulties and lines of traffic,
traditionally green, yellow and red:
After a route "outsiders" not from difficulties icons are black and white, so as not to distract the driver's attention.

[B66B]

Is this map for 3G DVD basic or 3GP hdd?

Only for 3G High (HNav...)/3GP(+)

[Speedy501]

In the first Post there is a new FW P(Production)0960. Is this available?

Can not recall I've seen 0960, are you sure?

Another question:
I have tried some scripts to have a backup of MMI, but all scrips fails and finishes in 2 seconds.

Another question:
I read somewhere that it's possible through menus on the MMI to have a FSC backup instead of backup script, is this possible?

(Currently running 0900 on a 3GP)

Speedy

[AUDI S LINE]

0960 only auto salon

[hako77]

PLEASE HAVE ANYBODY FSC FOR MMI 3G???THANKS

[AUDI S LINE]

PLEASE HAVE ANYBODY FSC FOR MMI 3G???THANKS

soon there will be

[XAVIER71]

Hy,
Congratulations for your great job, I baught an audi nq5 from 2008 and i would like to know if its possible to update directly in 2016 europe map, my MMI IS BNAV_EU_k0257_2_d1 version nav db is 8r0060884_ ece 5.5.5.
Thanhx a lot
best regards
Xavier