Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

How to programme Peugeot 3008 car key remote
17-01-2017, 21:57 PM,
Post: #1
PPeugeot  How to programme Peugeot 3008 car key remote
Hello,
Could some one help me to program Peugeot 3008 remote key please ?
I try with 3 new different key, impossible to do it.
3 keys start engine but remote don't work (lock & unlock), I followed diagbox instruction, some forum tuto, .... no success
Does someone know worked solution please ?
Thanks in advance

If helpful please press thanks and add a reputation thankyou
Quote this message in a reply
17-01-2017, 23:46 PM,
Post: #2
RE: How to programme Peugeot 3008 car key remote
What type of transponder is inside your blank keys,pcf 7941 or 7961 ? What programming device you have?
Reputation: +1 - Faisc@ [+1]
Quote this message in a reply
[+] 4 users say Thank You to djole3113 for this post
18-01-2017, 01:51 AM,
Post: #3
RE: How to programme Peugeot 3008 car key remote
A key programming tool, OBDSTAR F108
Quote this message in a reply
[+] 2 users say Thank You to bluethree for this post
18-01-2017, 07:26 AM,
Post: #4
RE: How to programme Peugeot 3008 car key remote
Hi,
As I sayed on 1st post, I try 3 different keys
2 remote with 3 bottons, 1 remote with 2 botton.
All of them 433MHZ ID46
I used diag box, Smok and Fvdi, coding is okay (car start) but bottons not working

If helpful please press thanks and add a reputation thankyou
Quote this message in a reply
18-01-2017, 10:15 AM, (This post was last modified: 18-01-2017, 10:19 AM by djole3113.)
Post: #5
RE: How to programme Peugeot 3008 car key remote
There is procedure for remote activation-first you do transponder(key) programming,then wait one minute,after that switch ignition on with the new key,press lock button for 5 or 10 seconds,release lock buton,switch ignition off,remove the key. Than test remote controls.
When you start the procedure,when programming device recognise car system,what numer of programmed keys is shown and what number of remotes? After programming procedure,does it change?
Also,maybe you have wrong remote types,especially if you use aftermarket keys.
Reputation: +1 - Faisc@ [+1]
Quote this message in a reply
[+] 2 users say Thank You to djole3113 for this post
18-01-2017, 12:16 PM, (This post was last modified: 18-01-2017, 15:40 PM by diag06.)
Post: #6
RE: How to programme Peugeot 3008 car key remote
I bought them not from dealer ...
3 different remote chip....
When Programming yes, I enter 3 keys, insert one after one, ... everything is OK but suddly no any remote can open or closed doors.
I followed diagbox processing.
How can I know remote types please ?
Do you have any good suppliers ?
Thanks

If helpful please press thanks and add a reputation thankyou
Quote this message in a reply
18-01-2017, 18:49 PM,
Post: #7
RE: How to programme Peugeot 3008 car key remote
Very important, I already asked you that : When you start the procedure,when programming device recognise car system,what numer of programmed keys is shown and what number of remotes? After programming procedure,does it change?
Reputation: +1 - Faisc@ [+1]
Quote this message in a reply
[+] 2 users say Thank You to djole3113 for this post
18-01-2017, 19:25 PM, (This post was last modified: 22-01-2017, 16:29 PM by dynamicsteam.)
Post: #8
RE: How to programme Peugeot 3008 car key remote
Put key into ignition. Turn key to ignition on position. Do not engine start. Hold lock button on key fob for around 10 seconds. Turn off ignition. Now should work ok. If not your coms unit could be faulty or most likely you have badly re virgin keys.

( For Key Fob RF Sync only / Key must start engine first ! )

Put key into ignition. Do not turn ignition on. Leave key in off position with key in barrell. Open bonnet, Close all doors, Remove vehicle battery 15 minutes after closing doors. Leave battery disconnected for 30 minutes. Important key must be in off position in barrel, if it is reconnect battery. Turn ignition on and off. Key should now work ok .

If they are second hand keys they won't programme as they will be locked out. As previous post stats. What number of keys does it say are present. 3 ? Does the car actually start on the 3 new keys?
Reputation: +1 - Faisc@ [+1]
Quote this message in a reply
[+] 6 users say Thank You to dynamicsteam for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
  Solved ✔ PEUGEOT PIN FROM BSI DUMP MARTINS AUTOMECH 3 133 26-03-2024, 05:51 AM
Last Post: MARTINS AUTOMECH
  PROBLEN TECODING PEUGEOT 407 2009 jeam 4 121 25-03-2024, 08:49 AM
Last Post: jeam
  Solved ✔ Please need flash firmware + eprm 95128 peugeot 407 jeam 1 55 24-03-2024, 19:27 PM
Last Post: jeam
PPeugeot Solved ✔ Peugeot Boxer 3 Visteon DCU102 IMMO OFF/VIRGIN DavidForgac 4 137 22-03-2024, 07:40 AM
Last Post: DavidForgac
PPeugeot IMMO OFF DCM 3.5 PEUGET 3008 soukti 0 82 22-03-2024, 04:36 AM
Last Post: soukti
PPeugeot Solved ✔ PEUGEOT 3008 MD1CS003 IMMO OFF d-dtronik 3 137 20-03-2024, 20:58 PM
Last Post: d-dtronik
  Solved ✔ peugeot 3008 pin bsi Michal72212 6 156 14-03-2024, 17:13 PM
Last Post: al70
PPeugeot Peugeot 308 DCM3.4 immo off temaindustriale 5 172 14-03-2024, 05:00 AM
Last Post: volavka
  bsi04ev 95128 virgin peugeot Michal72212 1 76 13-03-2024, 19:02 PM
Last Post: ioura
  virgin bsi peugeot 3008 Michal72212 0 41 13-03-2024, 14:44 PM
Last Post: Michal72212

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content