Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW Standard Tools 2.12 - WinKFP, NCSExpert, INPA, Tool32, etc
03-01-2017, 11:53 AM,
Post: #91
|
|||
|
|||
RE: BMW Standard Tools 2.12 - WinKFP, NCSExpert, INPA, Tool32, etc
Works, when before was old installation.
|
|||
03-01-2017, 16:32 PM,
(This post was last modified: 03-01-2017, 17:16 PM by kuno24.)
Post: #92
|
|||
|
|||
RE: BMW Standard Tools 2.12 - WinKFP, NCSExpert, INPA, Tool32, etc
2.10 Tool32 works without ActiveX registering, 2.11 and 2.12 not. Try install for clean Windows. But installer of these versions dont have ActiveX registering utility. This is in old 3-step Chinas installer. When you open 2.11 or 2.12 Tool32 without registering, then program itself opens, but stops on loading prg-scripts.
Working install for clean install is next: 1. Install from Chinas installer (step 1) Standard Tools, after install opens 2 Dos utilitys. Let him run to the end. 2. Reboot 3. Delete all installed catalogs (ECapps, NCSExpert, Ediabas) 4. Run installer 2.11 or 2.12 5.Reboot 6. Add to INPA, NCS, NFS all files and scripts from previos versions, what needed. I copied them from other working program. Also Ediabas>Ecu catalogue (directory). Also install OBD drivers as needed and configure port numbers on OBD driver and Ediabas> Obd.ini . By default is 3 on OBD driver. Set on OBD driver latency timer to 1 ms. |
|||
Reputation: +1 - Loliceman [+1] | |||
13-01-2017, 10:33 AM,
Post: #93
|
|||
|
|||
RE: BMW Standard Tools 2.12 - WinKFP, NCSExpert, INPA, Tool32, etc
Download is offline
|
|||
18-05-2018, 08:34 AM,
Post: #94
|
|||
|
|||
RE: BMW Standard Tools 2.12 - WinKFP, NCSExpert, INPA, Tool32, etc
hi friends
who have link ok about inpa ? thanks |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content