Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Cannot set time/date after NBT retrofit, while kombi_cic has been set
21-01-2017, 01:17 AM,
Post: #1
|
|||
|
|||
Cannot set time/date after NBT retrofit, while kombi_cic has been set
Hello, I have a problem that i can't set time / date after nbt retrofit to f30 with bkombi. there is no MOST cable in the car and i've check the kombi_cic has been set to kombi_low. However, i still can't set time / date. Has anyone seen this and got a solution? Any brain storming is welcomed as well. Thanks
Sent from my iPhone using Tapatalk |
|||
21-01-2017, 03:37 AM,
Post: #2
|
|||
|
|||
RE: Cannot set time/date after NBT retrofit, while kombi_cic has been set
(21-01-2017, 01:17 AM)bmwdd Wrote: Hello, I have a problem that i can't set time / date after nbt retrofit to f30 with bkombi. there is no MOST cable in the car and i've check the kombi_cic has been set to kombi_low. However, i still can't set time / date. Has anyone seen this and got a solution? Any brain storming is welcomed as well. Thanks Code the unit to match your FA, do not go FDL coding for this kind of things unless you retrofit this in a E series, but that is not the case |
|||
21-01-2017, 04:52 AM,
(This post was last modified: 21-01-2017, 04:58 AM by bmwdd.)
Post: #3
|
|||
|
|||
Cannot set time/date after NBT retrofit, while kombi_cic has been set
How do you know i didn't VO the unit? but on the other hand, i've used code verification to generate nbt's cafd based on the car's FA and then compared. Basically all the parameters are matching except those intended for customisation. So unless VO coding will do something extra other than configuring parameters as per FA, i'm clueless what went wrong
Sent from my iPhone using Tapatalk |
|||
21-01-2017, 12:51 PM,
Post: #4
|
|||
|
|||
RE: Cannot set time/date after NBT retrofit, while kombi_cic has been set
(21-01-2017, 04:52 AM)bmwdd Wrote: How do you know i didn't VO the unit? but on the other hand, i've used code verification to generate nbt's cafd based on the car's FA and then compared. Basically all the parameters are matching except those intended for customisation. So unless VO coding will do something extra other than configuring parameters as per FA, i'm clueless what went wrong I don't know but if it was done properly and you would not have this problem. Feel free to shoot me a PM so I can have a look using Teamviewer later on today. |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Kafas issue aftrer ACC Retrofit | It3_Magic | 14 | 533 |
Yesterday, 07:44 AM Last Post: It3_Magic |
|
G82 rear tail lights CSL retrofit | Sauron | 10 | 767 |
20-04-2024, 07:35 AM Last Post: SANYA |
|
BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS | intel123 | 891 | 465,710 |
20-04-2024, 01:05 AM Last Post: fe7565 |
|
Neck warmer retrofit | Just2fast5 | 5 | 377 |
17-04-2024, 11:20 AM Last Post: Spirit5676 |
|
ID4 evo to ID6 Evo full retrofit, ATM issues 03178A | mitch32 | 1 | 173 |
15-04-2024, 17:52 PM Last Post: mitch32 |
|
Bmw G31 retrofit Mgu id7 atm problem | intranet | 19 | 2,309 |
15-04-2024, 09:21 AM Last Post: evaldazj |
|
Unlimite Download from Mega without Waiting Time | budddyyy | 10 | 913 |
13-04-2024, 17:22 PM Last Post: Homersbud |
|
BMW E84 Cruise control retrofit not workig | Alyn546 | 4 | 219 |
12-04-2024, 14:23 PM Last Post: DieStream |
|
F10 FLA retrofit | beng2k | 30 | 1,023 |
11-04-2024, 18:43 PM Last Post: beng2k |
|
BMW f20 KOMBI2 retrofit | bm92 | 15 | 505 |
10-04-2024, 07:51 AM Last Post: bm92 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content