Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ISTA+ 4.03.21 (the problem with a combination of BMW x1)
20-01-2017, 18:50 PM,
Post: #1
|
|||
|
|||
ISTA+ 4.03.21 (the problem with a combination of BMW x1)
Hello ! I have a problem connecting to the BMW x1.Ista reads all the drivers in gray. Someone might know what the problem is? With the combination with F 10 everything works as it should. Any help is greatly appreciated. Regards!
|
|||
20-01-2017, 19:28 PM,
Post: #2
|
|||
|
|||
RE: ISTA+ 4.03.21 (the problem with a combination of BMW x1)
I had the same problem with X3 2010. And when I use Icom problem was solved.
|
|||
20-01-2017, 19:40 PM,
Post: #3
|
|||
|
|||
ISTA+ 4.03.21 (the problem with a combination of BMW x1)
What year is the X1?
|
|||
20-01-2017, 19:43 PM,
(This post was last modified: 20-01-2017, 19:51 PM by Cowboy.)
Post: #4
|
|||
|
|||
RE: ISTA+ 4.03.21 (the problem with a combination of BMW x1)
|
|||
20-01-2017, 20:53 PM,
Post: #5
|
|||
|
|||
ISTA+ 4.03.21 (the problem with a combination of BMW x1)
You're having this problem with ICOM NEXT?
Possibly firmware. You will communicate without problem with DCAN cable for the emergency. Currently I have big problems with new ICOM NEXT |
|||
20-01-2017, 21:48 PM,
Post: #6
|
|||
|
|||
RE: ISTA+ 4.03.21 (the problem with a combination of BMW x1)
My friend has the same problem with icom a2.
|
|||
20-01-2017, 22:00 PM,
(This post was last modified: 20-01-2017, 22:01 PM by Node.)
Post: #7
|
|||
|
|||
RE: ISTA+ 4.03.21 (the problem with a combination of BMW x1)
You can try to check if "Ethernet as preferred communication channel when connected via ICOM" is set to yes in VCI config tab of ISTA-D configuration (accessible by clicking wrench icon). I had problems on some cars too when its set to yes. Never had any problem on any car when its set to no.
|
|||
21-01-2017, 14:00 PM,
Post: #8
|
|||
|
|||
RE: ISTA+ 4.03.21 (the problem with a combination of BMW x1)
He has a problem with ista / p
|
|||
21-01-2017, 16:30 PM,
Post: #9
|
|||
|
|||
RE: ISTA+ 4.03.21 (the problem with a combination of BMW x1)
(20-01-2017, 22:00 PM)Node Wrote: You can try to check if "Ethernet as preferred communication channel when connected via ICOM" is set to yes in VCI config tab of ISTA-D configuration (accessible by clicking wrench icon). I had problems on some cars too when its set to yes. Never had any problem on any car when its set to no.I have set up as you write I tried also clear,, yes "and nothing ever changes ne |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
ISTA+ 4.47.1x Install Files - MEGA | shawnsheridan | 31 | 3,097 |
45 minutes ago Last Post: emhtuning |
|
Ediabas 7.6.0 for ISTA 4.46 | dfb | 1 | 101 |
2 hours ago Last Post: bimmer71 |
|
ista 4.46 Standalone | kiranabc | 97 | 12,033 |
Yesterday, 17:41 PM Last Post: kiranabc |
|
ISTA 4.47 test plan not available on M3 | bmwm3power | 4 | 258 |
Yesterday, 11:15 AM Last Post: bmwm3power |
|
ISTA Standalone Licenserequest up to v4.37.4x | Sedoy | 8,713 | 671,944 |
01-05-2024, 09:50 AM Last Post: Sedoy |
|
ista + 4.47 install | simplextibi | 1 | 433 |
30-04-2024, 12:22 PM Last Post: slackers |
|
ISTA 4.46.xx problems and possible solution | Sedoy | 98 | 12,143 |
27-04-2024, 09:48 AM Last Post: egyclick |
|
Bmw G31 retrofit Mgu id7 atm problem | intranet | 20 | 2,474 |
26-04-2024, 08:06 AM Last Post: smilo |
|
ISTA 4.47.1x I-LEVEL+OVERVIEW | AutoExe3219 | 0 | 338 |
24-04-2024, 22:52 PM Last Post: AutoExe3219 |
|
NBT EVO Connected Drive problem after update I-Level | SkeYT | 47 | 4,778 |
22-04-2024, 11:44 AM Last Post: kwat |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content