[BMWholic]

Hi Everyone

Got recently japanese E90 with CIC unit (2010 model). Now I am trying to converte GPS to my country' specs.
As I understand I have to change VO in CAS and FRM, so I have deleted VO for Japanese specs . Added English and VO of my country's radio and got those units coded.

In CCC I remember I had to code CTUNE and CAPPL as well. However in CIC there are no such modules.

The question is, what module do I need to code, is it just CIC and CID or something else too?
Also, after coding do I need to use WINKFP to update any modules (again on CCC I had to update 5 modules), if so which modules do I need to update with WINKFP. Or is it something else needs to be done, like adding another GPS receiver etc?

Many thanks for your help

[Fx82]

Try with ista-p.
As far as I know cic with Japan spec has different hardware. I'm not sure if everything will work in your countyr.

[BMWholic]

Try with ista-p.
As far as I know cic with Japan spec has different hardware. I'm not sure if everything will work in your countyr.

Never tried with ista.... Could you please explain what exactly do I need to do there? Just update CIC modules after VO change?
Yes, CCC has different hardware and HDD but it can be reprogrammed. Not sure with CIC in this case.

[Fx82]

Exactly modify vo and start ista-p.

[BMWholic]

Exactly modify vo and start ista-p.

Will give it a try

[Patrick11021979]

Exactly modify vo and start ista-p.

Will give it a try

Tried the same for a us spec car with ccc, but ista/p didn't accept it, had to replace all ccc modules it says.... No i did it with ncsexpert an ncs dummy.... only language... don't know how to change voice...