Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
MERCEDES: IS THST ALL I NEED ?
25-01-2017, 16:32 PM,
(This post was last modified: 25-01-2017, 16:37 PM by strikeforce.)
Post: #1
|
|||
|
|||
MERCEDES: IS THST ALL I NEED ?
I have so far kept away from Mercedes key programming because I regard that off my limit. After a year and half now of being in this forum I have learned a lot and still Learning.
I now intend to go into Benz key programming and my targeted models are mainly w203, w211, w164 and those within 2001-2007 model year range. Tools intending to buy are all going to be clone for now. R270 NEC programmer IR Reader BGA CHINA KEYS PICS ATTACHED I am going to hopefully describe the procedure taking w203 as example please correct me where I am wrong. 1 remove EIS from car and use R270 to read dump 2 post dump here for assistance to calculate keys 3 write back one of the calculated keys to the EIS 4 unsolder NEC chip from key and program it with the same key number written to the EIS and then solder back onto key 5 test key on car Now one thing not clear to me is where do I use the IR programmer. Please correct me where I am wrong. Thanks |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content