Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Lexia Firmware update
25-01-2017, 23:16 PM,
(This post was last modified: 25-01-2017, 23:18 PM by panalaurentiu88.)
Post: #1
|
|||
|
|||
Lexia Firmware update
I have firmware 4.3.2 should i upgrade to 4.3.3 or 4.3.4 ?
what is the difference between ? |
|||
26-01-2017, 00:42 AM,
Post: #2
|
|||
|
|||
RE: Lexia Firmware update
Don' need to do anything, Diagbox or PP2000 or Lexia software do that for you automatically according to the version of the soft. Up or down when the program start with the VCI connected. What Diagbox sw version do you use? but the very late version won't do and don't need.
|
|||
26-01-2017, 19:07 PM,
(This post was last modified: 26-01-2017, 19:12 PM by panalaurentiu88.)
Post: #3
|
|||
|
|||
RE: Lexia Firmware update
FIRMWARE: APPLI_XS_FUJI_P106138A V4.3.2 @ACTIA 03.01.14
LEXIA-921815 C I use Diagbox 7.82 for 2 days now diagbox 7.57 don't recognized Peugeot 3008 2013 engine Ecu and transmision and i update to 7.82 and now work fine. |
|||
26-01-2017, 21:11 PM,
Post: #4
|
|||
|
|||
RE: Lexia Firmware update
DiagBox v7.02 => Firmware = 4.3.0 > PP2000 = 600.70 & Lexia = 500.46
DiagBox v7.57 => Firmware = 4.3.2 > PP2000 = 600.71 & Lexia = 500.66 DiagBox v7.58 => Firmware = 4.3.2 > PP2000 = 600.71 & Lexia = 500.66 DiagBox v7.62 => Firmware = 4.3.3 > PP2000 = 600.72 & Lexia = 500.68 DiagBox v7.66 => Firmware = 4.3.4 > PP2000 = 600.72 & Lexia = 500.68 DiagBox 7.66+ and 8.02+ use 4.3.4. Up until 8.38 no newer version has been released. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content