[matigdy]

Hi,

I retrofited NBT in F25 2014/02 car.
There was CHAMP2 with CAN2 an ZGW 02 without MOST.

I see NBT unit on the list but cant code.
Log below:

Caf's suchen
Tal wird generiert
Abarbeitung wird gestartet

Read SVT before TAL execution started.
Read SVT before TAL execution finished.

TAL execution started.
VCM Update: VCM-Update is deactivated. VCM will not be updated. [C197]
ExecutionID=2017/01/31-15:18:10.246
[] prepareTALExecution started
[] prepareTALExecution finished
[] prepareVehicleForCoding started
[] prepareVehicleForCoding finished
[HU_NBT - 63] prepareECUforCoding started
[HU_NBT - 63] prepareECUforCoding finished
[HU_NBT - 63] authenticateECUforCoding started
[HU_NBT - 63] authenticateECUforCoding finished
[HU_NBT - 63 - cafd_00000ded-003_005_107] Transaction type: cdDeploy; Message: TA started
MCDDiagService<id=62649, job=com.bmw.psdz.jobs.uds.MCD3_PerformECUCoding, service=WDBI_PLAIN - WriteDataByIdentifier with unlimited Data-ID (plain hex value), description=error: negative response : requestOutOfRange, link=HU_NBT_63_ETHERNET>
[HU_NBT - 63 - cafd_00000ded-003_005_107] Transaction type: cdDeploy; Message: TA finished
[HU_NBT - 63] There was an error during TAL execution, please check the log files.
[HU_NBT - 63] - [Exception - HU_NBT - 63] job failed with negative response error:
code: service returned global negative response
description: Service WDBI_PLAIN returned a negative response with response code requestOutOfRange; ECU: HU_NBT_63_ETHERNET
severity: ERROR

[HU_NBT - 63] finalizeECUCoding started
[HU_NBT - 63] finalizeECUCoding finished
[] There was an error, please check the log files.
[] - [Exception - HU_NBT - 63] job failed with negative response error:
code: service returned global negative response
description: Service WDBI_PLAIN returned a negative response with response code requestOutOfRange; ECU: HU_NBT_63_ETHERNET
severity: ERROR

[] finalizeVehicleCoding started
[] finalizeVehicleCoding finished
[] finalizeTALExecution started
[] finalizeTALExecution finished
TAL execution finished
TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "18s". [C206]

Read SVT after TAL execution started.
Read SVT after TAL execution finished.
Abarbeitung beendet

[matigdy]

Update:
I removed 3AG from FA and code with success.
Car have TRSVC module with backup camera.
Any idea ?

[vitalix]

Update:
I removed 3AG from FA and code with success.
Car have TRSVC module with backup camera.
Any idea ?

SVT change !!

[forest]

Maybe your NBT is basic one without video input?

[matigdy]

Yes, it is NBT basic.
But I have RVC with TRSVC module (before it works with CHAMP2), it does not work with NBT?