[Bimmer540]

And NodeEdiabasVoltageControl.exe?

[Node]

NodeEdiabasVoltageControl.exe he can put wherever he wants. Sounds like correct actions taken. You can open regedit file with any text editor like notepad. Its format is quite straightforward. Then check with regedit that the key is there.

Other than that I don't know what could be the problem. Anything in the logs?

[pgahopeful26]

Just checked in the registry, it added it like it should have.

Question: What exactly dictates the proper IstaOperation/version folder that I'm supposed to add? I ask because when I check the ISTA version of my install... it looks like this:
System - 4.05.31
Data - 4.05.31
Service Data is 4.05.22
Global Data through ISTA DB XmlValuePrimitive OTHER is 4.05.30.

I added the IstaOperation.exe for 4.05.31. Should I have added 4.05.23's?

---

Answered my own question... I updated ISTA, followed your instructions in the first post and it works perfect. Must have been something in my ISTA install.

Awesome tool, thanks for trying to help earlier.

[faithless2]

Hey Guys,
Hey Node,

first of all thanks for your gerade Work!!

But plz let me Ask one Question...

I got ISTA+ Up and running including connection to my F20 via ENET-Cable. But it doesn't show Voltages in the Upper right corner.

I renamed the obd32.dll as you mentioned and copied everything anywhere you mentioned in your Post.

Is there something else to do because I'm using ENET-Cable?

Thanks for your time & reply

KR
Thorsten

[Node]

It is specifically locked to not interact with ISTA when using ENET cable. If you use ENET cable that means you connect to F+ series, so why you need voltage control then?

[faithless2]

It is specifically locked to not interact with ISTA when using ENET cable. If you use ENET cable that means you connect to F+ series, so why you need voltage control then?

Oh OK, so you mean i don't need it with F-Series because the automate Ignition-Switch works ?

I can confirm after deleting Fault-Memory Ignition turns off and on again...

[Node]

I personally do not have enet cable so can't test it, but until now no one said that something does not work on F+ series without voltage control.

[faithless2]

I personally do not have enet cable so can't test it, but until now no one said that something does not work on F+ series without voltage control.

Ok I see your point. Thanks for that...

If you ever need someone to test something on F-Series with enet-cable... I'll do that

[Bimmer540]

I personally do not have enet cable so can't test it, but until now no one said that something does not work on F+ series without voltage control.

Works perfect with Fxx.

[Node]

Support for 4.07.11 added.