[Craigmccly22]

The clip has to be the right way around, with the marked lead on Pin 1 if that is what you're asking.

Pin 1 is on the bottom left when the writing is right way up, or the tapered side of the chip is down, or at the dot if there is one.

By the way, the clips that come with the Digi are garbage, first thing you should do is replace it with a quality one like a Pomona.

Can't beat this site for help. Brilliant it is. That's the first thing I will do later. Order new leads for it. And try to work out the Wright way ti connect it. Can it damage the chip if connected wrong.