[beemerboy88]

ISTA 4.03.31 Voltage Control V2.

Simulates voltage of connected interface. ICOM, KDCAN etc.

password: beemerboy88

Install Instructions:

Unblock archive and extract files to \testergui\bin\release.
Put voltage tool on desktop (or any location).

How to use:

Start ISTA (if any problems try running as admin).
Run voltage control tool.
Start session.

Notes:

FASTA is disabled.
Default voltage on startup is 14V.
Shutdown the control tool to restore real time voltage monitoring.
Change screen position of voltage tool by dragging it using top left corner.

22/2/17: updated to V2 (bug fixes)

[uragan1987]

Are there any advantages when using this tool?

[Almaretto]

Are there any advantages when using this tool?

It is rather straight forward:

"Simulates voltage of connected interface. ICOM, KDCAN etc."

[RocketSurgeon]

I really like being able to use my K+DCAN cable to clear codes with Rheingold. Thank you for making this. I noticed that the close window "X" at the top does not work after applying the modified files. Am I doing something wrong? I'm running 4.03.31 from rutracker. It appears to have a few tweaked .dll files

[Node]

Hi, you can try my tool http://cartechnology.co.uk/showthread.php?tid=21543 which no one has complained about yet.

[per4mer]

I really like being able to use my K+DCAN cable to clear codes with Rheingold. Thank you for making this. I noticed that the close window "X" at the top does not work after applying the modified files. Am I doing something wrong? I'm running 4.03.31 from rutracker. It appears to have a few tweaked .dll files

It happened the same to me. Tried on both 4.03.31 variants, the one once posted by bb88 and also the other one from spider. Besides the fact that the main application can no longer be closed from "x" , it also enters in loop with "Close operation". The regarded window keeps popping asking to confirm "Close operation" but nothing happens (even if you "ok" several times) and you cannot return/go back from that state. Only if you close the main window from within Windows (close window).
I thought also it was something wrong with my installation or the local environment. Didn't find yet any solution.

P.S. This is not complaining, is just normal feed-back and should be considered as it is.

[Node]

I'm not a native English speaker, so for me both complaining and negative feedback are the same thing Which happens to every project, so its not something bad.

[per4mer]

I am not a native English speaker either.

[beemerboy88]

I really like being able to use my K+DCAN cable to clear codes with Rheingold. Thank you for making this. I noticed that the close window "X" at the top does not work after applying the modified files. Am I doing something wrong? I'm running 4.03.31 from rutracker. It appears to have a few tweaked .dll files

It happened the same to me. Tried on both 4.03.31 variants, the one once posted by bb88 and also the other one from spider. Besides the fact that the main application can no longer be closed from "x" , it also enters in loop with "Close operation". The regarded window keeps popping asking to confirm "Close operation" but nothing happens (even if you "ok" several times) and you cannot return/go back from that state. Only if you close the main window from within Windows (close window).
I thought also it was something wrong with my installation or the local environment. Didn't find yet any solution.

P.S. This is not complaining, is just normal feed-back and should be considered as it is.

Try updated version

[TomoR]

Thanks!!!! Now in V2 all works great like before....