Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Problem conect icom a1
07-02-2017, 21:41 PM, (This post was last modified: 07-02-2017, 21:59 PM by txalkie.)
Post: #1
Problem conect icom a1
Hello good evening, I have a problem with an ICOM A1, I can not connect to any car, I have been reading through the different solutions forum and I have not been able to communicate with the vehicle at any time, I have tried since changing the BIN file of ediabas, reinstall it , Network connection with the address of Itool radar, make the connection is the home and work group, update the firmware of the machine, I even got to format the computer dfos times to reinstall everything again following the steps of Tutorial of SPIDER80, THE RESULT IS ALWAYS THE SAME ERROR,

72121 unable to reserve vehicle interface

69036 client error 69036

100741 client error 100741

I have reinstalled all the visual files, net frame work are all installed, 3.5 4.5 4.6.2, windows service pack installed, fire wall disabled, there is no antivirus, the computer is a Lenovo T440s intel i5 2.2 turbo to 2.5 , 500gb hard drive, windows 7 64bits, NOT IN VIRTUAL

Any help, suggestion, idea will be very well received by me, THANK YOU for reading it and for the help in advance        


Attached Files Thumbnail(s)
                       
Quote this message in a reply
07-02-2017, 22:45 PM,
Post: #2
RE: Problem conect icom a1
The FAN TEST > FAIL

I had this on my ICOM and it was disabled from working. It is now in China getting repaired. I purchased a second ICOM since I see so many failures of these clones. The price of the official ICOM is really come down and I will buy one of these if I have another failure
Quote this message in a reply
[+] 2 users say Thank You to BMWS1000RR for this post
08-02-2017, 07:40 AM,
Post: #3
RE: Problem conect icom a1
(07-02-2017, 22:45 PM)BMWS1000RR Wrote:  The FAN TEST > FAIL

I had this on my ICOM and it was disabled from working. It is now in China getting repaired. I purchased a second ICOM since I see so many failures of these clones. The price of the official ICOM is really come down and I will buy one of these if I have another failure

Thanks for your answer, the fan if it works, it starts up, another thing is that the motherboard detects it, but it works, it will also talk to the seller, thanks for your response and your time
Quote this message in a reply
08-02-2017, 08:26 AM,
Post: #4
RE: Problem conect icom a1
What setting do you have in Rheingold?

If I help you, please push thanks and reputation
Quote this message in a reply
[+] 2 users say Thank You to mall for this post
08-02-2017, 10:19 AM,
Post: #5
RE: Problem conect icom a1
(08-02-2017, 08:26 AM)mall Wrote:  What setting do you have in Rheingold?




I've tried the icom connections, enet, all options except the usb cable
Quote this message in a reply
09-02-2017, 07:16 AM,
Post: #6
RE: Problem conect icom a1
Change laptop ip address...you have the same as for icom...change to: 169.254.1.1 or 169.254.92.5 or similar but DO NOT enter same ip address as icom...
Quote this message in a reply
[+] 2 users say Thank You to zeronoo for this post
09-02-2017, 12:50 PM,
Post: #7
RE: Problem conect icom a1
(09-02-2017, 07:16 AM)zeronoo Wrote:  Change laptop ip address...you have the same as for icom...change to: 169.254.1.1 or 169.254.92.5 or similar but DO NOT enter same ip address as icom...


Thanks for the suggestion, this afternoon I will try and comment the result, thanks for your time and help
Quote this message in a reply
09-02-2017, 20:14 PM,
Post: #8
RE: Problem conect icom a1
It does not work, I have changed several IPs starting with 169.254.x.x and it does not connect. Follows the same error

thanks for the suggestion
Quote this message in a reply
10-02-2017, 16:06 PM, (This post was last modified: 10-02-2017, 16:07 PM by zeronoo.)
Post: #9
RE: Problem conect icom a1
Open 169.254.92.38:60080 in your browser, use root as user, NZY11502 as pwd, go to firmware update and check the memory free amount: report number here, also try to allocate icom from there and see if works, laptop ip address should be something like 169.254.92.x (X an be any number from 1 to 254 but NO 38!)
Quote this message in a reply
[+] 2 users say Thank You to zeronoo for this post
10-02-2017, 20:55 PM, (This post was last modified: 10-02-2017, 20:57 PM by txalkie.)
Post: #10
RE: Problem conect icom a1
(09-02-2017, 12:50 PM)txalkie Wrote:  
(09-02-2017, 07:16 AM)zeronoo Wrote:  Change laptop ip address...you have the same as for icom...change to: 169.254.1.1 or 169.254.92.5 or similar but DO NOT enter same ip address as icom...


Thanks for the suggestion, this afternoon I will try and comment the result, thanks for your time and help

(10-02-2017, 16:06 PM)zeronoo Wrote:  Open 169.254.92.38:60080 in your browser, use root as user, NZY11502 as pwd, go to firmware update and check the memory free amount: report number here, also try to allocate icom from there and see if works, laptop ip address should be something like 169.254.92.x (X an be any number from 1 to 254 but NO 38!)



I'll test it tomorrow, I'll prove it, comment on the result, thanks for the suggestion

(10-02-2017, 20:55 PM)txalkie Wrote:  
(09-02-2017, 12:50 PM)txalkie Wrote:  
(09-02-2017, 07:16 AM)zeronoo Wrote:  Change laptop ip address...you have the same as for icom...change to: 169.254.1.1 or 169.254.92.5 or similar but DO NOT enter same ip address as icom...


Thanks for the suggestion, this afternoon I will try and comment the result, thanks for your time and help

(10-02-2017, 16:06 PM)zeronoo Wrote:  Open 169.254.92.38:60080 in your browser, use root as user, NZY11502 as pwd, go to firmware update and check the memory free amount: report number here, also try to allocate icom from there and see if works, laptop ip address should be something like 169.254.92.x (X an be any number from 1 to 254 but NO 38!)



I'll test it tomorrow, I'll prove it, comment on the result, thanks for the suggestion

memory free 260gb
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW NBT EVO Connected Drive problem after update I-Level SkeYT 47 4,703 22-04-2024, 11:44 AM
Last Post: kwat
  [MEGA] Any ESYS Editions + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS hashtagmaster 105 36,020 17-04-2024, 18:36 PM
Last Post: hashtagmaster
  Bmw G31 retrofit Mgu id7 atm problem intranet 19 2,316 15-04-2024, 09:21 AM
Last Post: evaldazj
XZBMW ICOM Firmware (NEXT & A2) always current! Vojno 206 43,274 12-04-2024, 23:36 PM
Last Post: bennymx
XZBMW Poor wifi signal from new ICOM's bmchicago 3 320 12-04-2024, 18:55 PM
Last Post: Node
  BMW E60 coding problem GarageX 8 354 02-04-2024, 10:07 AM
Last Post: GarageX
  Solved ✔ ICOM NEXT Error bmwcare 4 2,486 01-04-2024, 11:34 AM
Last Post: ivanp
  CCC flash WINKFP ICOM BimmerSLO 9 366 29-03-2024, 19:17 PM
Last Post: Hoborg
XZBMW Bmw 5,f10 radio problem RobertRexhaj 3 154 28-03-2024, 18:47 PM
Last Post: Unspec
  ISTA launcher problem Red_bean_bun 1 260 26-03-2024, 05:11 AM
Last Post: 2013m5

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content