Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

03-07 Silverado Tahoe Avalanche Hummer H2 etc programming, upgrade, problems
21-07-2017, 03:59 AM,
Post: #41
03-07 Silverado Tahoe Avalanche Hummer H2 etc programming, upgrade, problems
Left part of the main display is very dark. Right side is also on a darker side, but definitely better than the left. Can this be fixed? Also someone did try to fix the board and ugly solder blobs are everywhere :/
[Image: 1deeab2a5f5e3562c044a3849829a072.jpg]
Quote this message in a reply
25-08-2017, 23:26 PM,
Post: #42
03-07 Silverado Tahoe Avalanche Hummer H2 etc programming, upgrade, problems
Does someone knows what type of Infineon processor is that?
[Image: 9df7b09add0877cae09ecc1f31789700.jpg]
Quote this message in a reply
21-01-2018, 16:25 PM,
Post: #43
RE: 03-07 Silverado Tahoe Avalanche Hummer H2 etc programming, upgrade, problems
Ok, one more interesting case, if any did come across the same thing.
I have a cluster from 03-04 truck. Wanted to reflash it to the proper calibrations for specific VIN number (also from 03-04 truck) through Tis2Web. On the calibration confirmation screen it shows, that this cluster is from 05MY (which I know it is not). I did try different VIN numbers - result the same. I also did try to write the EEPROM from another 03-04 cluster - same thing.
What I know for sure is, that if I would blindly proceed with the reflash - the cluster will be bricked because it would try to store the calibration from 05 truck.

The only workaround I found is to get same cluster and connect it to Tis2Web and go through all the prompts and before the last step of reflashing to switch it with the other one I did try to reflash in the first place. Then proper calibrations will be stored.

But if then again I need to reflash this cluster - TIS2Web still thinks it is 05MY cluster.
Quote this message in a reply
24-01-2018, 02:05 AM,
Post: #44
03-07 Silverado Tahoe Avalanche Hummer H2 etc programming, upgrade, problems
One more time did happen today with another cluster. What I noticed, that both of those were previously remanufactured by Delphi. Found their stickers in the back. Possibly they got some kind of different firmware.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
ILandRover LR Discovery 3 - 2008 - IPC Programming arturjfonseca 1 70 25-03-2024, 00:24 AM
Last Post: toutou_gsm
  Yanhua mini ACDP programming tool koziol 42 14,091 04-10-2023, 19:28 PM
Last Post: johann74270
  Solved ✔ Any one used DP4 for resetting BMW / MINI BDC im having problems andi1571 2 606 14-04-2023, 23:26 PM
Last Post: andi1571
XZBMW Bmw FEM/BDC upgrade or downgrade g0tcha 4 1,951 12-01-2023, 14:20 PM
Last Post: bmwlover
YTMercedes Atego mp2 ins programming ikrom 0 358 07-11-2022, 06:02 AM
Last Post: ikrom
PCitroen BSI flash problems ck6uk 2 1,104 13-08-2019, 10:17 AM
Last Post: ck6uk
  Smart 450 SAM milage problems elbiscuit 2 790 06-03-2019, 03:20 AM
Last Post: volavka
ZTAudi Audi A4 RB4 Dasch problems teodoro 2 1,083 12-11-2018, 17:15 PM
Last Post: mefistofilos
  Problems with 908hp12! skens 0 795 03-02-2018, 08:35 AM
Last Post: skens
ZVW VW Caddy 2010 cluster upgrade Mex165 3 1,529 29-01-2018, 21:59 PM
Last Post: robot1

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content