Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW E92 New DME Failed Programming & Coding need help
17-02-2017, 12:53 PM,
(This post was last modified: 17-02-2017, 13:19 PM by BMWF01.)
Post: #1
|
|||
|
|||
BMW E92 New DME Failed Programming & Coding need help
|
|||
17-02-2017, 13:32 PM,
Post: #2
|
|||
|
|||
RE: BMW E92 New DME Failed Programming & Coding need help
WinKFP - is the best tool for this.
|
|||
17-02-2017, 17:05 PM,
Post: #3
|
|||
|
|||
RE: BMW E92 New DME Failed Programming & Coding need help
I replied to your thread on bimmerforums. Same idea. WinKFP. If you need extra help, I may be able to log in to your computer with TeamViewer and help.
|
|||
17-02-2017, 17:50 PM,
Post: #4
|
|||
|
|||
RE: BMW E92 New DME Failed Programming & Coding need help
What fault codes do you have in ISTA/D
are there any communication faults? is the DME the right one for this car? VIN sticker on the DME matching? what interface are you using? could you program with your setup successfully before? |
|||
04-03-2017, 01:53 AM,
Post: #5
|
|||
|
|||
RE: BMW E92 New DME Failed Programming & Coding need help
Sometimes the ISTA P, not good at programming, tried winkfp
|
|||
05-03-2017, 01:44 AM,
(This post was last modified: 05-03-2017, 01:47 AM by CATAHA.)
Post: #6
|
|||
|
|||
RE: BMW E92 New DME Failed Programming & Coding need help
Check fuse(s)
check DME Pins that they are not bend or moved inside the DME check wire connections are all the way and it's secured position A LONG time ago, i had to replace 4 "NEW" DME's because car would never start... and after the "5th" DME car started Some times it take 2~3 DME(s) (brand new) for bmw to function properly mainly on e9x series Welcome to the club If any of my posts or current one helps then don't forget to press thanks and add a reputation
|
|||
05-03-2017, 23:00 PM,
Post: #7
|
|||
|
|||
RE: BMW E92 New DME Failed Programming & Coding need help
Could also be related if you use an outdated version of ista-p compared to the software on the DME.
MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
09-03-2017, 05:32 AM,
Post: #8
|
|||
|
|||
RE: BMW E92 New DME Failed Programming & Coding need help
For this situation do not use ISTA-P, use WINKFP and try comfort mode and update the DME with the corresponding module name.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content