Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Dr. Gini diagnostics problem
19-02-2017, 17:47 PM,
Post: #1
|
|||
|
|||
Dr. Gini diagnostics problem
Hi everyone
I want to read error-codes on my BMW 520i e39 from 1998. I bought an OBD2 USB interface cable with K+DCAN, wich I connected to Windows 8.1 using Dr. Gini V0.014 with EDIABAS V7.3.0. I followed the instructions for the program, but when I connect the computer and the car the program says "ECU not connected or not responding". The car has the OBD2 20-pin output. Can you help me get to read my car's error codes? |
|||
19-02-2017, 18:36 PM,
Post: #2
|
|||
|
|||
RE: Dr. Gini diagnostics problem
Read sistem req for gini!!!
Sistems before 2003 not supported yet. |
|||
19-02-2017, 20:05 PM,
Post: #3
|
|||
|
|||
RE: Dr. Gini diagnostics problem
(19-02-2017, 18:36 PM)bobdinro Wrote: Read sistem req for gini!!! ok, how about INPA? I hear that is a great program for E39, but I can't figure out where I can get it. All I see on ebay etc. is the INPA softare on cd coming along a cable, but since I already have an INPA compatible cable, I don't want to buy a new one.. What do you think about INPA? Do you know where to get the INPA software alone? Do you know other (better?) E39 1998 compatible programs and do you know where I can get them? /kind regards HrEJAC |
|||
19-02-2017, 20:52 PM,
Post: #4
|
|||
|
|||
RE: Dr. Gini diagnostics problem
Do some research on forum and you will find all answers
|
|||
21-02-2017, 20:25 PM,
(This post was last modified: 21-02-2017, 20:31 PM by DNK76.)
Post: #5
|
|||
|
|||
RE: Dr. Gini diagnostics problem
INPA 3 EDIABAS 6.4.3 (windows 23bit, XP,VISTA,7,8,8.1,10 32bit) ediabas-6.4.3-full.nrg
INPA 5 EDIABAS 6.4.7 (INPA,EDIABAS,WINKF,PT,TOOL32 windows 23bit/64bit , NCSEXPER-windows 32bit |