[hafido1983]

Hi guys
i need coding abs vw passat 3C 2007
i only changed the park brake because damaged by water and light of abs .... on and abs becomes not coded
any help please
thanks

[dule-p]

Friend, first go into airbag modul and recode it, after that go to abs and coding 2 and type 40168 and do basic settings. For every basic setting you neet to login again with 40168.

[hafido1983]

Need coding ABS not 40168

[da14u]

This is from a Passat B6 2007 ABS and should help but looking at your scan I think you have battery or power issues, make sure your battery is fully charged as I've found it to be the mother of problems in VAG cars. Normally most of the electrical issues are sorted by a good battery.

   

   

   

   

OR

Try this thread: http://cartechnology.co.uk/showthread.php?tid=1634

[hafido1983]

Yes i find a low battery but now is ok
problem i need coding of abs for this type
thanks

[dule-p]

Need coding ABS not 40168

40168 IS NOT coding, it is login code for ABS , and you need to do few basic settings. As I saw, you have codied abs modul with 001000 . Also, you have to do is basic setting in parking brake.

[hafido1983]

Yes friend have coding or no...?

01044 - Control Module Incorrectly Coded
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 2
Fault Frequency: 1
Reset counter: 200
Time Indication: 0

Freeze Frame:
Speed: 0.0 km/h
Hex Value: 0x0000
Voltage: 12.25 V
Bin. Bits: 00011110
Count: 149
i want solve this fault ...?
did you understand or no
thanks

[da14u]

I think you've been given all the help you need but seems like you can't get your head around it. I can understand english is not your first language but honestly it's not rocket science to understand what we're saying. Do you actually know how to code a module? If you do then which coding on earth are you talking about? Have you tried coding with my info since you have the same engine which is BKP.

Yes friend have coding or no...?

01044 - Control Module Incorrectly Coded
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 2
Fault Frequency: 1
Reset counter: 200
Time Indication: 0

Freeze Frame:
Speed: 0.0 km/h
Hex Value: 0x0000
Voltage: 12.25 V
Bin. Bits: 00011110
Count: 149
i want solve this fault ...?
did you understand or no
thanks

[hafido1983]

Thanks
i tried some coding in the same bkp engine but no success
unfortunatly i didn't do scan before change parking brake ecu
need someone can calculate and give correct coding...
thanks again

[king kong]

Thanks
i tried some coding in the same bkp engine but no success
unfortunatly i didn't do scan before change parking brake ecu
need someone can calculate and give correct coding...
thanks again

Try 0000258
0000267
0000309