Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Icom A2(chinese clone)
07-03-2017, 19:55 PM,
Post: #1
XZBMW  Icom A2(chinese clone)
Hi

Having issues trying to get Ista-D and Ista-P to read my vehicle using ICOM A2 clone.

I have Ista-P 3.60 and Ista-D 4.02 installed and running.
I can select my ICOM a2 in connection manager and it does show the IP in connection manager as well as itool radar, in connection manager it does come up as being free but i have noticed the color icon is grey and not green.

when i select it and press connect it comes up with error ACCESS DENIED could not read vehicle data.


any ideas? i have edibia 7.3.0 installed. and the ICOM a2 has latest firmware added 1.4.05
Quote this message in a reply
07-03-2017, 20:29 PM, (This post was last modified: 07-03-2017, 21:08 PM by CATAHA.)
Post: #2
RE: Icom A2(chinese clone)
(07-03-2017, 19:55 PM)CMOSUK Wrote:  Hi

Having issues trying to get Ista-D and Ista-P to read my vehicle using ICOM A2 clone.

I have Ista-P 3.60 and Ista-D 4.02 installed and running.
I can select my ICOM a2 in connection manager and it does show the IP in connection manager as well as itool radar, in connection manager it does come up as being free but i have noticed the color icon is grey and not green.

when i select it and press connect it comes up with error ACCESS DENIED could not read vehicle data.


any ideas? i have edibia 7.3.0 installed. and the ICOM a2 has latest firmware added 1.4.05
Most current firmware is {attached} ICOM-Image-03-14-04

and here is what you are running


Attached Files Thumbnail(s)
       

If any of my posts or current one helps then don't forget to press thanks and add a reputation thankyou
Visit this user's website
Quote this message in a reply
[+] 2 users say Thank You to CATAHA for this post
07-03-2017, 21:38 PM,
Post: #3
RE: Icom A2(chinese clone)
(07-03-2017, 20:29 PM)CATAHA Wrote:  
(07-03-2017, 19:55 PM)CMOSUK Wrote:  Hi

Having issues trying to get Ista-D and Ista-P to read my vehicle using ICOM A2 clone.

I have Ista-P 3.60 and Ista-D 4.02 installed and running.
I can select my ICOM a2 in connection manager and it does show the IP in connection manager as well as itool radar, in connection manager it does come up as being free but i have noticed the color icon is grey and not green.

when i select it and press connect it comes up with error ACCESS DENIED could not read vehicle data.


any ideas? i have edibia 7.3.0 installed. and the ICOM a2 has latest firmware added 1.4.05
Most current firmware is {attached} ICOM-Image-03-14-04

and here is what you are running

so i should update my firmware to 1.40.06? is their anything else i need to do? also can you provide me a link to download these please?
Quote this message in a reply
07-03-2017, 22:30 PM,
Post: #4
RE: Icom A2(chinese clone)
ICOM-Image-03-14-04.rar
File Type: .rar
Downloaded: 133 times
Size: 13.74 MB

Quote this message in a reply
[+] 6 users say Thank You to slaw1971 for this post
08-03-2017, 05:24 AM,
Post: #5
RE: Icom A2(chinese clone)

Thank you.

What else would I need to do after firmware has been updated?
Quote this message in a reply
08-03-2017, 12:30 PM,
Post: #6
RE: Icom A2(chinese clone)
Just a little update, I entered the iP address in network, adapter settings to that if my ICOM (169.254.92.38) it started sending and receiving data, when I check through Ista-d it comes up in connection manager same as before but this time the icon color is now green.

I still get the access denied message though when I try to connect.

Through ista-p I get the message the interface could not be reserved.

I appreciate all the help and would like to solve this as well I still need to update firmware to icom a2 so will try that next. Any other ideas please let me know thanks.
Quote this message in a reply
08-03-2017, 13:16 PM, (This post was last modified: 08-03-2017, 13:18 PM by Bimmer540.)
Post: #7
XZBMW  RE: Icom A2(chinese clone)
Icom Next? and NIC adapter from laptop? Or cable? what do you see in iToolradar?
Quote this message in a reply
08-03-2017, 13:19 PM,
Post: #8
RE: Icom A2(chinese clone)
(08-03-2017, 13:16 PM)snypertje Wrote:  Icom Next? and NIC adapter from laptop? Or cable?

Icom a2, the laptop network adapter built Into it. I see the icom and it's iP 169.254.92.38
Quote this message in a reply
08-03-2017, 14:06 PM,
Post: #9
RE: Icom A2(chinese clone)
So you want wireless connecting with Icom A2. Does the A2 have wifi?
Quote this message in a reply
08-03-2017, 14:12 PM,
Post: #10
RE: Icom A2(chinese clone)
No, don't need wireless just trying to get ista-p and ista-d to work with it.

I keep getting access denied error in ista-d

And I get interface could not be reserved on ista-p
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  [MEGA] Any ESYS Editions + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS hashtagmaster 102 34,759 Yesterday, 05:59 AM
Last Post: hashtagmaster
XZBMW Poor wifi signal from new ICOM's bmchicago 1 134 26-03-2024, 03:04 AM
Last Post: rocdeng
  E53 LCM Clone maninblack 10 252 25-03-2024, 14:03 PM
Last Post: Spitfire555
  For anyone having problem with ICOM NEXT FW update via ISTA+. ImmBoo 16 3,900 24-03-2024, 11:29 AM
Last Post: Twointje
  TESTO tool with ICOM Rolzs 5 316 17-03-2024, 20:23 PM
Last Post: Vojno
  Request xHP 6HP decrypted files and icom flasher tste1982 10 830 05-03-2024, 22:47 PM
Last Post: bradsm87
  FRM repair and clone DME & DDE jaki 27 1,328 01-03-2024, 22:52 PM
Last Post: r0my81
XZBMW FEM MODUL CLONE arcelik 10 499 19-02-2024, 10:16 AM
Last Post: bm92
XZBMW ICOM Firmware (NEXT & A2) always current! Vojno 203 41,943 16-02-2024, 19:32 PM
Last Post: Vojno
XZBMW BMW_ISPI_ICOM-FW_03-23-22 & ICOM-Next-FW_04-23-22 shawnsheridan 22 2,375 05-02-2024, 23:47 PM
Last Post: vagrom

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content