Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Flashing retrofitted NBT in E60
10-03-2017, 13:26 PM,
Post: #1
|
|||
|
|||
Flashing retrofitted NBT in E60
Hi guys,
I need to flash my NBT unit, can anyone advice how to do it when it's installed in E60? So I can connect to unit directly using IP address. Is there any procedure to flash it? Thanks in advance. |
|||
11-03-2017, 11:22 AM,
Post: #2
|
|||
|
|||
Flashing retrofitted NBT in E60
You need your Spezial enbt adapter to flash it.
Gesendet von iPhone mit Tapatalk |
|||
11-03-2017, 12:15 PM,
Post: #3
|
|||
|
|||
RE: Flashing retrofitted NBT in E60
Flashing nbt in E60 is same as flashing on bench without ZGW . Many useful threads online already covered this topic.
Sent from my SM-G920F using Tapatalk |
|||
11-03-2017, 19:31 PM,
Post: #4
|
|||
|
|||
RE: Flashing retrofitted NBT in E60
Can anyone point me in the right direction? Some links maybe?
|
|||
12-03-2017, 19:01 PM,
Post: #5
|
|||
|
|||
RE: Flashing retrofitted NBT in E60
(11-03-2017, 19:31 PM)pweber84 Wrote: Can anyone point me in the right direction? Some links maybe? check the attached , also same section has a lot to read . good luck |