[mexanico1971]

HI

got this PUG 406 SW hdi auto gear, from 2001 completed mess up by others garages
Car some times not start , connection width BSI to ECU fail some times.
Owner bring other BSI to adapt, but same problem ,
The car have bean in the dealer garage to make SW update
DTC-- ECU not good configure

I I"m thinking put all new dumps , to clone .
engine is RHZ
wend the car not start , key immo blink in dash and Diag tool can"t not establish communication


BSI S110950410
ecu 1 plug 0281010623

Thank"s in advance

Brs

[marianro2007]

Do you know the car pass? If you know it that is means you will not need other dumps. Virginise all of them and try to reprogram using PP2000 tool. Also, when you have an immo isue, do you see on the dash numbers or bars?

[mexanico1971]

Do you know the car pass? If you know it that is means you will not need other dumps. Virginise all of them and try to reprogram using PP2000 tool. Also, when you have an immo isue, do you see on the dash numbers or bars?

Hi
thank"s for the input!
Yes dash is normal
But how do I put dump"s in virgin state ?>

Guys I need "29f400 and eeprom for this ecu please

Brs

[mexanico1971]

Hi guys !
eeprom in ecu is st95080 not typical 95p08
I desolder to read it and , now car start but got these dtc"s
P1613 Configuration
P0603 Internal Control Module Keep Alive Memory (KAM) Error
P1517 EDC15C2-Coded anti-start function
P0603 Internal Control Module Keep Alive Memory (KAM) Error

Wend I try to config PP2000 give error comunication

need ecu dump"s please

Brs

[CHIKODIAG]

HI in the rar you will fond tow fill
1/ for the eprom 95080 it is virgin if you have the pin code programe as new ecu
if not let him virgin it will work no problem (car start)
2/the 2ed it is for the flash 29F400 it is the closer one i have i hoppe it will solve your problem
Peugeot 406_hdi(110cv)_0281 010 627 1037353401 original
GOOD LUCK

[mexanico1971]

HI in the rar you will fond tow fill
1/ for the eprom 95080 it is virgin if you have the pin code programe as new ecu
if not let him virgin it will work no problem (car start)
2/the 2ed it is for the flash 29F400 it is the closer one i have i hoppe it will solve your problem
Peugeot 406_hdi(110cv)_0281 010 627 1037353401 original
GOOD LUCK

thank"s my friend , but the owner has pic up the car in weekend
I be able to start it, but "Kam error " wont go off

thank you very much

brs