[grmsek.damjan]

Hello
I need some help
Got old peugeot 106 with intermittent immo fault and I want to turn it off.

Peugeot 106, year 98, engine 1.0
0 261 204 625
96 302 784 80

I did some research and found a working off file(I hope)from saxo with the same part number(0 261 204 625)

Must I write this off file into new 24C02 eeprom and make it wp,or lift pin7 and bridge to pin8 instead of write to an original eeprom 93c46(B58221)

Must I disconnect immo box (the car is without keypad)?

I attached off file faund on google,please check it

[ROD-BENDERS]

Hello
I need some help
Got old peugeot 106 with intermittent immo fault and I want to turn it off.

Peugeot 106, year 98, engine 1.0
0 261 204 625
96 302 784 80

I did some research and found a working off file(I hope)from saxo with the same part number(0 261 204 625)

Must I write this off file into new 24C02 eeprom and make it wp,or lift pin7 and bridge to pin8 instead of write to an original eeprom 93c46(B58221)

Must I disconnect immo box (the car is without keypad)?

I attached off file faund on google,please check it

Hi mate, can you post dump 93CS46 ?

[grmsek.damjan]

Here is ori
Please pin code ,too
What about immo box?

[dabaca]

Here is ori
Please pin code ,too
What about immo box?

disconect immo box

[ROD-BENDERS]

Here is ori
Please pin code ,too
What about immo box?

here try

[grmsek.damjan]

Hello
I owe all of you an answer, a solution
On this ecu are two options;
-First is unsolder 93c46(B58221) and try to start the car..
-Second, write immo off to new eeprom(I dont have a new eeprom at the moment,so I didnt try), unplug immo box..

I chose the first,because the car is running fine without eeprom with and without immo box and key antena, the only thing is that the engine warning light is lit(injection control unit,permanent) I disconnected the warning light and thats it (who cares for old car,which will be soon on junkyard)

Thanks all of you for help, I gave you thnks and rep.