Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Need xprog 5.5.0 or 5.5.5 atmega64 dump
13-03-2017, 18:48 PM, (This post was last modified: 13-03-2017, 19:19 PM by volavka.)
Post: #1
Need xprog 5.5.0 or 5.5.5 atmega64 dump
I need help.. My xprog 5.5.0 clone. I do mistake I update.. Aftee update cannot use need repair I need 5.5.0 or 5.5.5 atmega 64 original dump for my xprog. Clone. Anyone can share.. Pls help

[Image: 5c46eee6da8bf74b989b5f08350ece87.jpg]
Quote this message in a reply
13-03-2017, 19:20 PM,
Post: #2
RE: Need xprog 5.5.0 or 5.5.5 atmega64 dump
Use search button http://cartechnology.co.uk/showthread.ph...ight=xprog

BEST CHIPTUNING SERVICE BY Zenter Performance  [Image: congrats.gif]

Contact Skype: zenter-88 
Facebook: https://www.facebook.com/ZenterPerformance
--------------------------------------------------------------------------------------------------------------

highest Quality ChiPTuninG Files BY PTF Team https://performance-tuningfiles.com/
POWER BY TECHNOLOGY drive

--------------------------------------------------------------------------------------------------------------
BEST CHIPTUNING SERVICE BY Jurebv   [Image: yes.gif]
Contact Skype: live:jure.coric_1
https://files.tuning-makarska.com/
--------------------------------------------------------------------------------------------------------------
-
IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE   
In progress TUNING STAGE1/DPF/SCR/EGR/TVA/FLAP/ START STOP OFF Software 

WHAT'S NEWS !
-Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG 
-Citroen DS5 Steering lock Renew/Write Code by dumps
-Passat CCM Repair corrupted dump succes
-VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED !
-IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X
-Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS


-=[Full WinOLS/ECM Titanium User] =-

Remember!  dirty hands  are a sign of clean money 

шшш.αήkαbôôτ.Ćô.цk
Visit this user's website
Quote this message in a reply
[+] 2 users say Thank You to volavka for this post
13-03-2017, 20:18 PM,
Post: #3
RE: Need xprog 5.5.0 or 5.5.5 atmega64 dump
Or 5.5.1 the most stable version from our mate luis...


Attached Files
atmega.rar
File Type: .rar
Downloaded: 282 times
Size: 445.83 KB

Quote this message in a reply
[+] 6 users say Thank You to rs@chip for this post
15-03-2017, 16:10 PM, (This post was last modified: 15-03-2017, 16:12 PM by chong5195.)
Post: #4
RE: Need xprog 5.5.0 or 5.5.5 atmega64 dump
But i don has 5.5.1 software.. after dump i can use 5.5.0 software>>>/????,, i need dump flash or eeprom????

(13-03-2017, 19:20 PM)volavka Wrote:  Use search button http://cartechnology.co.uk/showthread.ph...ight=xprog

now i still has one xprog clone 5.5.0.. i can use 5.5.0 to read or dump atmega 64????
Quote this message in a reply
15-03-2017, 22:14 PM,
Post: #5
RE: Need xprog 5.5.0 or 5.5.5 atmega64 dump
(15-03-2017, 16:10 PM)chong5195 Wrote:  But i don has 5.5.1 software.. after dump i can use 5.5.0 software>>>/????,, i need dump flash or eeprom????

(13-03-2017, 19:20 PM)volavka Wrote:  Use search button http://cartechnology.co.uk/showthread.ph...ight=xprog

now i still has one xprog clone 5.5.0.. i can use 5.5.0 to read or dump atmega 64????

you cant read atmega full dump becouse it is secured..use pinout I atached,erase whole chip,program flash/eeprom set fuse and lock bits..yob done
Quote this message in a reply
[+] 2 users say Thank You to rs@chip for this post
18-03-2017, 11:45 AM,
Post: #6
RE: Need xprog 5.5.0 or 5.5.5 atmega64 dump
Yes u r right.. 5.5.0 cannot read atmega64.. i just buy 5.60 from china just waiting .. after i install 5.60 .i just can read atmega64. then repair my 5.5.0 update to 5.5.5
Quote this message in a reply
18-03-2017, 12:01 PM,
Post: #7
RE: Need xprog 5.5.0 or 5.5.5 atmega64 dump
You dont have to read the atmega just erase it then rewrite new file to it
you dint need to remove the chip

put chip back in xprog
connect other xprog to broken xprog as been told and then erase and reprogram with 5.5.5 dumps
if you have other xprog already then you dont need to go buy a third

if my post helps please give Reputation under and Thanks under
Quote this message in a reply
[+] 2 users say Thank You to domelec for this post
18-03-2017, 12:12 PM,
Post: #8
RE: Need xprog 5.5.0 or 5.5.5 atmega64 dump
(18-03-2017, 12:01 PM)domelec Wrote:  You dont have to read the atmega just erase it then rewrite new file to it
you dint need to remove the chip

put chip back in xprog
connect other xprog to broken xprog as been told and then erase and reprogram with 5.5.5 dumps
if you have other xprog already then you dont need to go buy a third

yes . i not remove the chip. i pinout all aready solder but i only has 5.5.0 xprog now cannot read or delate...now i just waiting new xprog 5.60 with dongle... after i get my new xprog i just can repair atmege.. thank mate ur information is important for me..
Quote this message in a reply
19-03-2017, 09:30 AM, (This post was last modified: 19-03-2017, 09:31 AM by rs@chip.)
Post: #9
RE: Need xprog 5.5.0 or 5.5.5 atmega64 dump
(18-03-2017, 12:12 PM)chong5195 Wrote:  
(18-03-2017, 12:01 PM)domelec Wrote:  You dont have to read the atmega just erase it then rewrite new file to it
you dint need to remove the chip

put chip back in xprog
connect other xprog to broken xprog as been told and then erase and reprogram with 5.5.5 dumps
if you have other xprog already then you dont need to go buy a third

yes . i not remove the chip. i pinout all aready solder but i only has 5.5.0 xprog now cannot read or delate...now i just waiting new xprog 5.60 with dongle... after i get my new xprog i just can repair atmege.. thank mate ur information is important for me..

you dont read with any xprog version mate...look my pictures atached how to conect in circut, erase the chip , write files , set fuse/lock bites and yob done..you can do that with any version u want...download 5.5.1 version if you use files I attach..
Quote this message in a reply
[+] 2 users say Thank You to rs@chip for this post
19-03-2017, 16:36 PM, (This post was last modified: 19-03-2017, 17:10 PM by chong5195.)
Post: #10
RE: Need xprog 5.5.0 or 5.5.5 atmega64 dump
(19-03-2017, 09:30 AM)alex.eobd2 Wrote:  
(18-03-2017, 12:12 PM)chong5195 Wrote:  
(18-03-2017, 12:01 PM)domelec Wrote:  You dont have to read the atmega just erase it then rewrite new file to it
you dint need to remove the chip

put chip back in xprog
connect other xprog to broken xprog as been told and then erase and reprogram with 5.5.5 dumps
if you have other xprog already then you dont need to go buy a third

yes . i not remove the chip. i pinout all aready solder but i only has 5.5.0 xprog now cannot read or delate...now i just waiting new xprog 5.60 with dongle... after i get my new xprog i just can repair atmege.. thank mate ur information is important for me..

you dont read with any xprog version mate...look my pictures atached how to conect in circut, erase the chip , write files , set fuse/lock bites and yob done..you can do that with any version u want...download 5.5.1 version if you use files I attach..

mate now i erase the chip aready .. how to write the new file .. now my 5.5.0 can do it??. see the picture cannot write only can erase

(19-03-2017, 16:36 PM)chong5195 Wrote:  
(19-03-2017, 09:30 AM)alex.eobd2 Wrote:  
(18-03-2017, 12:12 PM)chong5195 Wrote:  
(18-03-2017, 12:01 PM)domelec Wrote:  You dont have to read the atmega just erase it then rewrite new file to it
you dint need to remove the chip

put chip back in xprog
connect other xprog to broken xprog as been told and then erase and reprogram with 5.5.5 dumps
if you have other xprog already then you dont need to go buy a third

yes . i not remove the chip. i pinout all aready solder but i only has 5.5.0 xprog now cannot read or delate...now i just waiting new xprog 5.60 with dongle... after i get my new xprog i just can repair atmege.. thank mate ur information is important for me..

you dont read with any xprog version mate...look my pictures atached how to conect in circut, erase the chip , write files , set fuse/lock bites and yob done..you can do that with any version u want...download 5.5.1 version if you use files I attach..

mate now i erase the chip aready .. how to write the new file .. now my 5.5.0 can do it??. see the picture cannot write only can erase

(15-03-2017, 22:14 PM)alex.eobd2 Wrote:  
(15-03-2017, 16:10 PM)chong5195 Wrote:  But i don has 5.5.1 software.. after dump i can use 5.5.0 software>>>/????,, i need dump flash or eeprom????

(13-03-2017, 19:20 PM)volavka Wrote:  Use search button http://cartechnology.co.uk/showthread.ph...ight=xprog

now i still has one xprog clone 5.5.0.. i can use 5.5.0 to read or dump atmega 64????

you cant read atmega full dump becouse it is secured..use pinout I atached,erase whole chip,program flash/eeprom set fuse and lock bits..yob done

sorry mate what is eeprom set fuse and lock bits??? sorry i never do this before .. can u tell me clear?? pls

hi guy i aready flash ..eeprom and config... i still not understand what is the fuse bits and lock bits.. but now my 5.5.0 is work.. running in 5.5.5 software


Attached Files Thumbnail(s)
   
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Solved ✔ PEUGEOT PIN FROM BSI DUMP MARTINS AUTOMECH 3 129 26-03-2024, 05:51 AM
Last Post: MARTINS AUTOMECH
XZBMW get ISN from EDC16CP35 dump mauricio153 10 373 24-03-2024, 22:21 PM
Last Post: aejanow
  RFA virgin dump J.Boza 5 1,356 23-03-2024, 23:28 PM
Last Post: diag06
  PIN code VW Polo ECU magneti marelli IAW4MV.dd from dump alkazav 1 64 14-03-2024, 10:33 AM
Last Post: legze
  Audi A8 D4 bcm2 dump repair fault 02811 kuki88 1 61 13-03-2024, 18:00 PM
Last Post: ROD-BENDERS
XZBMW get ISN from EDC17CP02 dump mauricio153 3 124 09-03-2024, 00:06 AM
Last Post: volavka
KOpel OPEL EDC16C39 Need PIN From Dump atomantmk 9 252 07-03-2024, 11:24 AM
Last Post: raffy haddad
ORenult Solved ✔ Renault EDC16C3 need virgin dump 0281013366 kino123 4 173 06-03-2024, 14:46 PM
Last Post: kino123
  AUDI 80 2.0 1994my i need DUMP from ROM 0 261 200 735 roanoke 0 48 29-02-2024, 09:41 AM
Last Post: roanoke
ZSkoda Dump File for E61 HKL Meens 0 46 23-02-2024, 21:52 PM
Last Post: Meens

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content