Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Need xprog 5.5.0 or 5.5.5 atmega64 dump
19-03-2017, 17:46 PM,
Post: #11
RE: Need xprog 5.5.0 or 5.5.5 atmega64 dump
(19-03-2017, 16:36 PM)chong5195 Wrote:  
(19-03-2017, 09:30 AM)alex.eobd2 Wrote:  
(18-03-2017, 12:12 PM)chong5195 Wrote:  
(18-03-2017, 12:01 PM)domelec Wrote:  You dont have to read the atmega just erase it then rewrite new file to it
you dint need to remove the chip

put chip back in xprog
connect other xprog to broken xprog as been told and then erase and reprogram with 5.5.5 dumps
if you have other xprog already then you dont need to go buy a third

yes . i not remove the chip. i pinout all aready solder but i only has 5.5.0 xprog now cannot read or delate...now i just waiting new xprog 5.60 with dongle... after i get my new xprog i just can repair atmege.. thank mate ur information is important for me..

you dont read with any xprog version mate...look my pictures atached how to conect in circut, erase the chip , write files , set fuse/lock bites and yob done..you can do that with any version u want...download 5.5.1 version if you use files I attach..

mate now i erase the chip aready .. how to write the new file .. now my 5.5.0 can do it??. see the picture cannot write only can erase

(19-03-2017, 16:36 PM)chong5195 Wrote:  
(19-03-2017, 09:30 AM)alex.eobd2 Wrote:  
(18-03-2017, 12:12 PM)chong5195 Wrote:  
(18-03-2017, 12:01 PM)domelec Wrote:  You dont have to read the atmega just erase it then rewrite new file to it
you dint need to remove the chip

put chip back in xprog
connect other xprog to broken xprog as been told and then erase and reprogram with 5.5.5 dumps
if you have other xprog already then you dont need to go buy a third

yes . i not remove the chip. i pinout all aready solder but i only has 5.5.0 xprog now cannot read or delate...now i just waiting new xprog 5.60 with dongle... after i get my new xprog i just can repair atmege.. thank mate ur information is important for me..

you dont read with any xprog version mate...look my pictures atached how to conect in circut, erase the chip , write files , set fuse/lock bites and yob done..you can do that with any version u want...download 5.5.1 version if you use files I attach..

mate now i erase the chip aready .. how to write the new file .. now my 5.5.0 can do it??. see the picture cannot write only can erase

(15-03-2017, 22:14 PM)alex.eobd2 Wrote:  
(15-03-2017, 16:10 PM)chong5195 Wrote:  But i don has 5.5.1 software.. after dump i can use 5.5.0 software>>>/????,, i need dump flash or eeprom????

(13-03-2017, 19:20 PM)volavka Wrote:  Use search button http://cartechnology.co.uk/showthread.ph...ight=xprog

now i still has one xprog clone 5.5.0.. i can use 5.5.0 to read or dump atmega 64????

you cant read atmega full dump becouse it is secured..use pinout I atached,erase whole chip,program flash/eeprom set fuse and lock bits..yob done

sorry mate what is eeprom set fuse and lock bits??? sorry i never do this before .. can u tell me clear?? pls

hi guy i aready flash ..eeprom and config... i still not understand what is the fuse bits and lock bits.. but now my 5.5.0 is work.. running in 5.5.5 software

yes is done my xprog is work now thank u everyone .. i just understand what is fuse bit and lock bit s..thank u.. i am very happy now


Attached Files Thumbnail(s)
   
Quote this message in a reply
20-03-2017, 15:12 PM,
Post: #12
RE: Need xprog 5.5.0 or 5.5.5 atmega64 dump
(19-03-2017, 16:36 PM)chong5195 Wrote:  
(19-03-2017, 09:30 AM)alex.eobd2 Wrote:  
(18-03-2017, 12:12 PM)chong5195 Wrote:  
(18-03-2017, 12:01 PM)domelec Wrote:  You dont have to read the atmega just erase it then rewrite new file to it
you dint need to remove the chip

put chip back in xprog
connect other xprog to broken xprog as been told and then erase and reprogram with 5.5.5 dumps
if you have other xprog already then you dont need to go buy a third

yes . i not remove the chip. i pinout all aready solder but i only has 5.5.0 xprog now cannot read or delate...now i just waiting new xprog 5.60 with dongle... after i get my new xprog i just can repair atmege.. thank mate ur information is important for me..

you dont read with any xprog version mate...look my pictures atached how to conect in circut, erase the chip , write files , set fuse/lock bites and yob done..you can do that with any version u want...download 5.5.1 version if you use files I attach..

mate now i erase the chip aready .. how to write the new file .. now my 5.5.0 can do it??. see the picture cannot write only can erase

(19-03-2017, 16:36 PM)chong5195 Wrote:  
(19-03-2017, 09:30 AM)alex.eobd2 Wrote:  
(18-03-2017, 12:12 PM)chong5195 Wrote:  
(18-03-2017, 12:01 PM)domelec Wrote:  You dont have to read the atmega just erase it then rewrite new file to it
you dint need to remove the chip

put chip back in xprog
connect other xprog to broken xprog as been told and then erase and reprogram with 5.5.5 dumps
if you have other xprog already then you dont need to go buy a third

yes . i not remove the chip. i pinout all aready solder but i only has 5.5.0 xprog now cannot read or delate...now i just waiting new xprog 5.60 with dongle... after i get my new xprog i just can repair atmege.. thank mate ur information is important for me..

you dont read with any xprog version mate...look my pictures atached how to conect in circut, erase the chip , write files , set fuse/lock bites and yob done..you can do that with any version u want...download 5.5.1 version if you use files I attach..

mate now i erase the chip aready .. how to write the new file .. now my 5.5.0 can do it??. see the picture cannot write only can erase

(15-03-2017, 22:14 PM)alex.eobd2 Wrote:  
(15-03-2017, 16:10 PM)chong5195 Wrote:  But i don has 5.5.1 software.. after dump i can use 5.5.0 software>>>/????,, i need dump flash or eeprom????

(13-03-2017, 19:20 PM)volavka Wrote:  Use search button http://cartechnology.co.uk/showthread.ph...ight=xprog

now i still has one xprog clone 5.5.0.. i can use 5.5.0 to read or dump atmega 64????

you cant read atmega full dump becouse it is secured..use pinout I atached,erase whole chip,program flash/eeprom set fuse and lock bits..yob done

sorry mate what is eeprom set fuse and lock bits??? sorry i never do this before .. can u tell me clear?? pls

hi guy i aready flash ..eeprom and config... i still not understand what is the fuse bits and lock bits.. but now my 5.5.0 is work.. running in 5.5.5 software

hi guy after 1 day using , masage alway ask for me update why like that .. and what i need to do??


Attached Files Thumbnail(s)
   
Quote this message in a reply
20-03-2017, 22:29 PM,
Post: #13
RE: Need xprog 5.5.0 or 5.5.5 atmega64 dump
Was this software for the xprog you are using it with?

if my post helps please give Reputation under and Thanks under
Quote this message in a reply
[+] 2 users say Thank You to domelec for this post
21-03-2017, 14:35 PM, (This post was last modified: 21-03-2017, 14:42 PM by Clusters.)
Post: #14
RE: Need xprog 5.5.0 or 5.5.5 atmega64 dump
(20-03-2017, 22:29 PM)domelec Wrote:  Was this software for the xprog you are using it with?

before i using 5.5.0 can run in window 8.1.. .. now after 5.5.5 cannot run window 8.1 only can run xp and 7.. software i download for member . i using 5.5.5
Quote this message in a reply
21-03-2017, 16:34 PM, (This post was last modified: 21-03-2017, 16:35 PM by rs@chip.)
Post: #15
RE: Need xprog 5.5.0 or 5.5.5 atmega64 dump
(21-03-2017, 14:35 PM)chong5195 Wrote:  
(20-03-2017, 22:29 PM)domelec Wrote:  Was this software for the xprog you are using it with?

before i using 5.5.0 can run in window 8.1.. .. now after 5.5.5 cannot run window 8.1 only can run xp and 7.. software i download for member . i using 5.5.5

5.5.5 firmware have certificate problem on windows 8.1,10...I also test it..look on post 28
http://cartechnology.co.uk/showthread.ph...ight=xprog
Quote this message in a reply
[+] 4 users say Thank You to rs@chip for this post
22-03-2017, 11:56 AM,
Post: #16
RE: Need xprog 5.5.0 or 5.5.5 atmega64 dump
Alex eobd so 5.5.5 cannot run in window 8.1 or 10... if u got any idea pls share thank u
Quote this message in a reply
22-03-2017, 15:22 PM, (This post was last modified: 18-04-2017, 11:11 AM by volavka.)
Post: #17
RE: Need xprog 5.5.0 or 5.5.5 atmega64 dump
Most softwares were made for xp
this is a known fact and many softwares had problems running on win7 etc so with newer os like windows 8 is going to be an even bigger problem especially if the software is old like most car softwares (CK) are all done for nowadays windows xp and windows 7 32bit systems
how many times do people need to hear this same thing?????

if you want newer working software for newer versions of windows ie 8/10 etc then buy the original and get the support from the developers of said software/hardware.

if my post helps please give Reputation under and Thanks under
Quote this message in a reply
[+] 7 users say Thank You to domelec for this post
29-09-2018, 18:10 PM,
Post: #18
RE: Need xprog 5.5.0 or 5.5.5 atmega64 dump
Fuse bits are as confusing as they can get, because of Atmels inverse logic. If you follow the fusebit settings, is actually the opposite and you lock out the SPI and the CPU is done for good.

Also Atmel studio 7.0 is more "advanced" so it will cause even more problems.
these are the correct settings:

low fuse should say 2F
high fuse should say CA
extended should say FF
Lock fuse should say FC
Quote this message in a reply
30-09-2018, 18:19 PM, (This post was last modified: 30-09-2018, 18:22 PM by dil6222.)
Post: #19
RE: Need xprog 5.5.0 or 5.5.5 atmega64 dump
(29-09-2018, 18:10 PM)spiki_x Wrote:  Fuse bits are as confusing as they can get, because of Atmels inverse logic. If you follow the fusebit settings, is actually the opposite and you lock out the SPI and the CPU is done for good.

Also Atmel studio 7.0 is more "advanced" so it will cause even more problems.
these are the correct settings:

low fuse should say 2F
high fuse should say CA
extended should say FF
Lock fuse should say FC

Hello cpu is not done for good can easily be unlocked fuse bits reset etc 
Check my.guide out smile

https://cartechnology.co.uk/showthread.php?tid=39496

under If mine or others posts and info are helpful please give thanks/rep smile yes
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Solved ✔ PEUGEOT PIN FROM BSI DUMP MARTINS AUTOMECH 3 133 26-03-2024, 05:51 AM
Last Post: MARTINS AUTOMECH
XZBMW get ISN from EDC16CP35 dump mauricio153 10 383 24-03-2024, 22:21 PM
Last Post: aejanow
  RFA virgin dump J.Boza 5 1,360 23-03-2024, 23:28 PM
Last Post: diag06
  PIN code VW Polo ECU magneti marelli IAW4MV.dd from dump alkazav 1 65 14-03-2024, 10:33 AM
Last Post: legze
  Audi A8 D4 bcm2 dump repair fault 02811 kuki88 1 64 13-03-2024, 18:00 PM
Last Post: ROD-BENDERS
XZBMW get ISN from EDC17CP02 dump mauricio153 3 124 09-03-2024, 00:06 AM
Last Post: volavka
KOpel OPEL EDC16C39 Need PIN From Dump atomantmk 9 256 07-03-2024, 11:24 AM
Last Post: raffy haddad
ORenult Solved ✔ Renault EDC16C3 need virgin dump 0281013366 kino123 4 175 06-03-2024, 14:46 PM
Last Post: kino123
  AUDI 80 2.0 1994my i need DUMP from ROM 0 261 200 735 roanoke 0 48 29-02-2024, 09:41 AM
Last Post: roanoke
ZSkoda Dump File for E61 HKL Meens 0 46 23-02-2024, 21:52 PM
Last Post: Meens

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content