Posts: 307 Threads: 118
Threads: 118
Thanks Received: 7 in 7 posts
Thanks Given: 96
Joined: Mar 2016
Reputation:
3
RE: Need xprog 5.5.0 or 5.5.5 atmega64 dump
(19-03-2017, 16:36 PM)chong5195 Wrote:
(19-03-2017, 09:30 AM)alex.eobd2 Wrote:
(18-03-2017, 12:12 PM)chong5195 Wrote:
(18-03-2017, 12:01 PM)domelec Wrote: You dont have to read the atmega just erase it then rewrite new file to it
you dint need to remove the chip
put chip back in xprog
connect other xprog to broken xprog as been told and then erase and reprogram with 5.5.5 dumps
if you have other xprog already then you dont need to go buy a third
yes . i not remove the chip. i pinout all aready solder but i only has 5.5.0 xprog now cannot read or delate...now i just waiting new xprog 5.60 with dongle... after i get my new xprog i just can repair atmege.. thank mate ur information is important for me..
you dont read with any xprog version mate...look my pictures atached how to conect in circut, erase the chip , write files , set fuse/lock bites and yob done..you can do that with any version u want...download 5.5.1 version if you use files I attach..
mate now i erase the chip aready .. how to write the new file .. now my 5.5.0 can do it??. see the picture cannot write only can erase
(19-03-2017, 16:36 PM)chong5195 Wrote:
(19-03-2017, 09:30 AM)alex.eobd2 Wrote:
(18-03-2017, 12:12 PM)chong5195 Wrote:
(18-03-2017, 12:01 PM)domelec Wrote: You dont have to read the atmega just erase it then rewrite new file to it
you dint need to remove the chip
put chip back in xprog
connect other xprog to broken xprog as been told and then erase and reprogram with 5.5.5 dumps
if you have other xprog already then you dont need to go buy a third
yes . i not remove the chip. i pinout all aready solder but i only has 5.5.0 xprog now cannot read or delate...now i just waiting new xprog 5.60 with dongle... after i get my new xprog i just can repair atmege.. thank mate ur information is important for me..
you dont read with any xprog version mate...look my pictures atached how to conect in circut, erase the chip , write files , set fuse/lock bites and yob done..you can do that with any version u want...download 5.5.1 version if you use files I attach..
mate now i erase the chip aready .. how to write the new file .. now my 5.5.0 can do it??. see the picture cannot write only can erase
(15-03-2017, 22:14 PM)alex.eobd2 Wrote:
(15-03-2017, 16:10 PM)chong5195 Wrote: But i don has 5.5.1 software.. after dump i can use 5.5.0 software>>>/????,, i need dump flash or eeprom????
now i still has one xprog clone 5.5.0.. i can use 5.5.0 to read or dump atmega 64????
you cant read atmega full dump becouse it is secured..use pinout I atached,erase whole chip,program flash/eeprom set fuse and lock bits..yob done
sorry mate what is eeprom set fuse and lock bits??? sorry i never do this before .. can u tell me clear?? pls
hi guy i aready flash ..eeprom and config... i still not understand what is the fuse bits and lock bits.. but now my 5.5.0 is work.. running in 5.5.5 software
yes is done my xprog is work now thank u everyone .. i just understand what is fuse bit and lock bit s..thank u.. i am very happy now
Posts: 307 Threads: 118
Threads: 118
Thanks Received: 7 in 7 posts
Thanks Given: 96
Joined: Mar 2016
Reputation:
3
RE: Need xprog 5.5.0 or 5.5.5 atmega64 dump
(19-03-2017, 16:36 PM)chong5195 Wrote:
(19-03-2017, 09:30 AM)alex.eobd2 Wrote:
(18-03-2017, 12:12 PM)chong5195 Wrote:
(18-03-2017, 12:01 PM)domelec Wrote: You dont have to read the atmega just erase it then rewrite new file to it
you dint need to remove the chip
put chip back in xprog
connect other xprog to broken xprog as been told and then erase and reprogram with 5.5.5 dumps
if you have other xprog already then you dont need to go buy a third
yes . i not remove the chip. i pinout all aready solder but i only has 5.5.0 xprog now cannot read or delate...now i just waiting new xprog 5.60 with dongle... after i get my new xprog i just can repair atmege.. thank mate ur information is important for me..
you dont read with any xprog version mate...look my pictures atached how to conect in circut, erase the chip , write files , set fuse/lock bites and yob done..you can do that with any version u want...download 5.5.1 version if you use files I attach..
mate now i erase the chip aready .. how to write the new file .. now my 5.5.0 can do it??. see the picture cannot write only can erase
(19-03-2017, 16:36 PM)chong5195 Wrote:
(19-03-2017, 09:30 AM)alex.eobd2 Wrote:
(18-03-2017, 12:12 PM)chong5195 Wrote:
(18-03-2017, 12:01 PM)domelec Wrote: You dont have to read the atmega just erase it then rewrite new file to it
you dint need to remove the chip
put chip back in xprog
connect other xprog to broken xprog as been told and then erase and reprogram with 5.5.5 dumps
if you have other xprog already then you dont need to go buy a third
yes . i not remove the chip. i pinout all aready solder but i only has 5.5.0 xprog now cannot read or delate...now i just waiting new xprog 5.60 with dongle... after i get my new xprog i just can repair atmege.. thank mate ur information is important for me..
you dont read with any xprog version mate...look my pictures atached how to conect in circut, erase the chip , write files , set fuse/lock bites and yob done..you can do that with any version u want...download 5.5.1 version if you use files I attach..
mate now i erase the chip aready .. how to write the new file .. now my 5.5.0 can do it??. see the picture cannot write only can erase
(15-03-2017, 22:14 PM)alex.eobd2 Wrote:
(15-03-2017, 16:10 PM)chong5195 Wrote: But i don has 5.5.1 software.. after dump i can use 5.5.0 software>>>/????,, i need dump flash or eeprom????
now i still has one xprog clone 5.5.0.. i can use 5.5.0 to read or dump atmega 64????
you cant read atmega full dump becouse it is secured..use pinout I atached,erase whole chip,program flash/eeprom set fuse and lock bits..yob done
sorry mate what is eeprom set fuse and lock bits??? sorry i never do this before .. can u tell me clear?? pls
hi guy i aready flash ..eeprom and config... i still not understand what is the fuse bits and lock bits.. but now my 5.5.0 is work.. running in 5.5.5 software
hi guy after 1 day using , masage alway ask for me update why like that .. and what i need to do??
Posts: 307 Threads: 118
Threads: 118
Thanks Received: 7 in 7 posts
Thanks Given: 96
Joined: Mar 2016
Reputation:
3
RE: Need xprog 5.5.0 or 5.5.5 atmega64 dump
(20-03-2017, 22:29 PM)domelec Wrote: Was this software for the xprog you are using it with?
before i using 5.5.0 can run in window 8.1.. .. now after 5.5.5 cannot run window 8.1 only can run xp and 7.. software i download for member . i using 5.5.5
•
21-03-2017, 16:34 PM, (This post was last modified: 21-03-2017, 16:35 PM by rs@chip.)
Posts: 1,816 Threads: 255
Threads: 255
Thanks Received: 1,266 in 608 posts
Thanks Given: 387
Joined: Jun 2015
Reputation:
490
RE: Need xprog 5.5.0 or 5.5.5 atmega64 dump
(21-03-2017, 14:35 PM)chong5195 Wrote:
(20-03-2017, 22:29 PM)domelec Wrote: Was this software for the xprog you are using it with?
before i using 5.5.0 can run in window 8.1.. .. now after 5.5.5 cannot run window 8.1 only can run xp and 7.. software i download for member . i using 5.5.5
Posts: 910 Threads: 12
Threads: 12
Thanks Received: 1,517 in 538 posts
Thanks Given: 2,237
Joined: Feb 2014
Reputation:
569
RE: Need xprog 5.5.0 or 5.5.5 atmega64 dump
Most softwares were made for xp
this is a known fact and many softwares had problems running on win7 etc so with newer os like windows 8 is going to be an even bigger problem especially if the software is old like most car softwares (CK) are all done for nowadays windows xp and windows 7 32bit systems
how many times do people need to hear this same thing?????
if you want newer working software for newer versions of windows ie 8/10 etc then buy the original and get the support from the developers of said software/hardware.
if my post helps please give Reputation and Thanks
Posts: 13 Threads: 0
Threads: 0
Thanks Received: 0 in 0 posts
Thanks Given: 22
Joined: Dec 2013
Reputation:
0
RE: Need xprog 5.5.0 or 5.5.5 atmega64 dump
Fuse bits are as confusing as they can get, because of Atmels inverse logic. If you follow the fusebit settings, is actually the opposite and you lock out the SPI and the CPU is done for good.
Also Atmel studio 7.0 is more "advanced" so it will cause even more problems.
these are the correct settings:
low fuse should say 2F
high fuse should say CA
extended should say FF
Lock fuse should say FC
•
30-09-2018, 18:19 PM, (This post was last modified: 30-09-2018, 18:22 PM by dil6222.)
(29-09-2018, 18:10 PM)spiki_x Wrote: Fuse bits are as confusing as they can get, because of Atmels inverse logic. If you follow the fusebit settings, is actually the opposite and you lock out the SPI and the CPU is done for good.
Also Atmel studio 7.0 is more "advanced" so it will cause even more problems.
these are the correct settings:
low fuse should say 2F
high fuse should say CA
extended should say FF
Lock fuse should say FC
Hello cpu is not done for good can easily be unlocked fuse bits reset etc
Check my.guide out