Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ISTA 4.04.20 Voltage Control tool
14-03-2017, 16:13 PM,
Post: #1
XZBMW  ISTA 4.04.20 Voltage Control tool
ISTA 4.04.20 Voltage Control.

Simulates voltage/ignition of connected interface. ICOM, KDCAN etc.

password: beemerboy88

Install Instructions:

Unblock archive and extract files to \testergui\bin\release.
Put voltage tool on desktop (or any location).

How to use:

Start ISTA (if there are any problems, try running as admin).
Run voltage control tool.
Start session.

Notes:

FASTA/HW checks are disabled.
Default voltage on startup is 14V.
Shutdown the control tool to restore real time voltage monitoring.
Change screen position of voltage tool by dragging it using top left corner.


Attached Files
ISTA 4.04.20 Voltage Control.txt
File Type: .txt
Downloaded: 388 times
Size: 70 bytes

Reputation: +31 - simonchs [+1] , CT120 [+1] , okolo [+1] , Twoone [+1] , Marcos [+1] , fabulous [+1] , georgia55 [+1] , Bimmer540 [+1] , Dirchik [+1] , Joe2 [+1] , rabihfiras [+1] , ruben_17non [+1] , kestum [+1] , jerry_han77 [+1] , smahel [+1] , Blackline [+1] , Volksburg [+1] , Loliceman [+1] , PUMUKY [+1] , Arual [+1] , nino17 [+1] , andyburm [+1] , Rooster330i [+1] , ivica21 [+1] , ixot [+1] , JarsaR [+1] , RReader [+1] , Kenny [+1] , Vojno [+1] , jimi [+1] , bumek [+1]
Quote this message in a reply
[+] 120 users say Thank You to beemerboy88 for this post
23-03-2017, 11:30 AM,
Post: #2
RE: ISTA 4.04.20 Voltage Control tool
When I use ISTA 4.04.20 Voltage Control does it fix this problem?

When I connect F11 2011 with Enet cable I get error PAD-Modus
must be activated.


When I connect F11 with Icom no problems.
Quote this message in a reply
23-03-2017, 13:00 PM, (This post was last modified: 23-03-2017, 16:35 PM by Bimmer540.)
Post: #3
XZBMW  RE: ISTA 4.04.20 Voltage Control tool
ISTA 4.04.20 Voltage Control only works with standalone?


Is it possible to setup 14.3 voltage?
Quote this message in a reply
04-05-2017, 19:29 PM,
Post: #4
RE: ISTA 4.04.20 Voltage Control tool
When I extract the file in release folder, ISTA do not work. Wat is the problem?
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW SSD Creator Ncsexpert (New Tool) scorpium59 542 38,061 1 hour ago
Last Post: Mefiuu92
  ista for use whit vcx se db8000 0 20 2 hours ago
Last Post: db8000
  ista 4.46 Standalone kiranabc 31 2,835 2 hours ago
Last Post: kiranabc
  AOS Ista possible to deactivate second check after scan? RaoulK1998 17 279 6 hours ago
Last Post: RaoulK1998
XZBMW ISTA 4.46.xx problems and possible solution Sedoy 76 7,278 Yesterday, 20:02 PM
Last Post: Node
XZBMW ISTA Standalone Licenserequest up to v4.37.4x Sedoy 8,646 627,345 Yesterday, 16:29 PM
Last Post: Sedoy
XZBMW Update ISTA at once 4.43.40 (ISTA Update Program) charlesjyw 34 6,434 Yesterday, 10:39 AM
Last Post: MINIGP1610
XZBMW BMW ISTA-P Rheingold 69.0.200 (Torrent File) carsoftcare 1 120 26-03-2024, 12:09 PM
Last Post: hlip
XZBMW Tool for bench read 8hp Garryq 9 1,557 26-03-2024, 09:32 AM
Last Post: skywoker
  ISTA launcher problem Red_bean_bun 1 155 26-03-2024, 05:11 AM
Last Post: 2013m5

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content