[beemerboy88]

ISTA 4.04.20 Voltage Control.

Simulates voltage/ignition of connected interface. ICOM, KDCAN etc.

password: beemerboy88

Install Instructions:

Unblock archive and extract files to \testergui\bin\release.
Put voltage tool on desktop (or any location).

How to use:

Start ISTA (if there are any problems, try running as admin).
Run voltage control tool.
Start session.

Notes:

FASTA/HW checks are disabled.
Default voltage on startup is 14V.
Shutdown the control tool to restore real time voltage monitoring.
Change screen position of voltage tool by dragging it using top left corner.

[Bimmer540]

When I use ISTA 4.04.20 Voltage Control does it fix this problem?

When I connect F11 2011 with Enet cable I get error PAD-Modus
must be activated.


When I connect F11 with Icom no problems.

[Bimmer540]

ISTA 4.04.20 Voltage Control only works with standalone?


Is it possible to setup 14.3 voltage?

[balikci]

When I extract the file in release folder, ISTA do not work. Wat is the problem?