[Scaniamastertech]

Hi guys I have a BMW 5 series with a elv fault
But when I put icom in it sees no terminal 15 any ideas ?

Thanks in advance peter

[majkiel]

Change elv, reset elv fault counter with tool32 in CAS module . Now with elv fault you have acess to CAS module only. If you got comfort acess check wires and plugs in driver door many Times made elv error. Sory my englisch is no good

Wysłane z mojego SM-G389F przy użyciu Tapatalka

[Scaniamastertech]

Does elv need to be changed ?

[majkiel]

First try to reset elv error counter in CAS module, if not help check wires in driver door Lock mechanism.

Wysłane z mojego SM-G389F przy użyciu Tapatalka

---

Inpa show you elv status in CAS module

Wysłane z mojego SM-G389F przy użyciu Tapatalka

[Node]

There is a ISTA+ ABL called "ELV blocks terminal 15". I propose you follow it first. Please note you need to enter vehicle identification manually to use it, because automatic one is not possible.

[Scaniamastertech]

There is a ISTA+ ABL called "ELV blocks terminal 15". I propose you follow it first. Please note you need to enter vehicle identification manually to use it, because automatic one is not possible.

Sorry buddy could you treat me as a idiot what program am I using and could you do step-by-step instructions

[Node]

I'm speaking of ISTA+ also known as Rheingold or ISTA-D. You start diagnosis there by choosing Operations but not "read out vehicle data" but VIN or basic features instead. Then click information search, switch to text search, enter "terminal 15" as search string and the ABL will be one of first found.

[Scaniamastertech]

I'm speaking of ISTA+ also known as Rheingold or ISTA-D. You start diagnosis there by choosing Operations but not "read out vehicle data" but VIN or basic features instead. Then click information search, switch to text search, enter "terminal 15" as search string and the ABL will be one of first found.

Cheers buddy will do that
There are guys that release it and program it in under 10 mins I want to learn