Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Power shut down while programming
16-03-2017, 14:39 PM,
(This post was last modified: 16-03-2017, 14:41 PM by pdc.)
Post: #1
|
|||
|
|||
Power shut down while programming
Hi Guys
i was programing a combox with ista P 3.59 from bmw f10 535d,and it happen a power shutdown on my garage ,and consequently the volts lowered from 13,8 to 12,1 .After some seconds the programming procedure aborted and now the car does not work.Someone as experienced the same problem?. Now the car does not comunicate and ista shows 0V on terminal 15 . What is the recomended procedure? Thanks in advance. |
|||
16-03-2017, 15:15 PM,
Post: #2
|
|||
|
|||
RE: Power shut down while programming
(16-03-2017, 14:39 PM)pdc Wrote: Hi Guys Did you try a battery reset? Pull the cables from the battery for about 30 minutes and then reconnect. |
|||
17-03-2017, 01:04 AM,
Post: #3
|
|||
|
|||
Power shut down while programming
(16-03-2017, 15:15 PM)dracon Wrote:(16-03-2017, 14:39 PM)pdc Wrote: Hi Guys In my experience 30s is sufficient but I go longer if I'm not rushing. Sent from my iPhone using Tapatalk Pro If this post helped you in anyway please use the thanks and/or REP buttons down here. Thanks!
|
|||
17-03-2017, 17:47 PM,
Post: #4
|
|||
|
|||
RE: Power shut down while programming
Solved
Today i starter a new session of ista p and it recovered the all car without any problem. It seems the car or ista saved all the data and recovered everything. I did not disconnect the battery. Thanks to everybody that try to help (17-03-2017, 01:04 AM)cryptocar Wrote:(16-03-2017, 15:15 PM)dracon Wrote:(16-03-2017, 14:39 PM)pdc Wrote: Hi Guys |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content