Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Advise on flashing CCC
21-03-2017, 21:31 PM,
(This post was last modified: 21-03-2017, 21:34 PM by Silva1337.)
Post: #1
|
|||
|
|||
Advise on flashing CCC
Hello guys i just bought icom and never flashed most module before so i got some questions..
Firstly i would prefer to use winkpf and i found on internet that sequence is: -CC3F60 <-- Audio -CC4760 <-- tune -CC6260 <-- Most/gateway -CC6360 <-- Host -CCA060 <--Application It is correct? If yes does it matters if ccc from fl or non fl model? I got istap 3.60 if i use it can ii choose only to update CCC? The last one if i gonna choose winkpf method using easyconnect which connection type i need to choose, i heard that most_master it is correct? |
|||
21-03-2017, 22:51 PM,
Post: #2
|
|||
|
|||
RE: Advise on flashing CCC
Yes correct order. flash with most_async_ab625 but on 62 with base. not most
yes ista p with expert mode can update only ccc facelift and non facelift doesnt matter |
|||
22-03-2017, 12:08 PM,
(This post was last modified: 22-03-2017, 12:12 PM by Silva1337.)
Post: #3
|
|||
|
|||
RE: Advise on flashing CCC
(21-03-2017, 22:51 PM)SweetBMW Wrote: Yes correct order. flash with most_async_ab625 but on 62 with base. not most Sorry can you clarify what do you mean on 62 with base, i understood ill will choose most_async_ab625 but what that mean 62 with base?You mean change interface for ccc gateway? |
|||
22-03-2017, 12:30 PM,
Post: #4
|
|||
|
|||
RE: Advise on flashing CCC
Use Easyconnect to make the changes to what mode you flash with. When you are going to flash the 62 adress, lock the icom in "base". Not most_async
|
|||
22-03-2017, 13:01 PM,
(This post was last modified: 22-03-2017, 13:57 PM by Silva1337.)
Post: #5
|
|||
|
|||
RE: Advise on flashing CCC
Yes i understand about changing modes with easyconnect, adress 62 is -CC6260 most gateway you mean
|
|||
22-03-2017, 16:54 PM,
(This post was last modified: 22-03-2017, 16:54 PM by SweetBMW.)
Post: #6
|
|||
|
|||
RE: Advise on flashing CCC
Yes you are correct, that is what i mean.
edit: remember to restart winfkp after changing modes, i have instances where it would still flash in most mode if not restart winkfp. just to be safe |
|||
22-03-2017, 21:31 PM,
(This post was last modified: 22-03-2017, 22:29 PM by Silva1337.)
Post: #7
|
|||
|
|||
RE: Advise on flashing CCC
Okay thank you very much for usefull information
one more question about mulf and tcum i need to use most_async_ab625 ? |
|||
22-03-2017, 22:54 PM,
Post: #8
|
|||
|
|||
RE: Advise on flashing CCC
Yes. That's correct for most only modules. But the gateway part of ccc should be flashed with base via can.
|
|||
26-03-2017, 12:16 PM,
Post: #9
|
|||
|
|||
RE: Advise on flashing CCC
In my opinion (and ISTA) GW should be the first one...
-CC6260 <-- Most/gateway -CC3F60 <-- Audio -CC4760 <-- tune -CC6360 <-- Host -CCA060 <--Application |
|||
27-03-2017, 18:36 PM,
(This post was last modified: 27-03-2017, 18:36 PM by ap90500.)
Post: #10
|
|||
|
|||
RE: Advise on flashing CCC
My advice: Don't flash a CCC, unless the job is really unavoidable. Saves tons of headache.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content