Possibly Related Threads…

***mariux0510*** · (This post was last modified: 27-03-2017, 20:31 PM by Clusters.)

Hello,

Please help somebody disabled additive system for this car:
Ford Focus C-MAX 2.0 TDCi 2005
ECU: Siemens SID803 5WS40166K-T 3DGC J38AC
SW: 8M51
HW: 10102989AA

FULL BDM

I try disabled faults:
P2584 Additive system MIL signal
P2585 Additive system warning lamp

1 day working perfect, but now MIL ON again
No faults in ECU, but additive system faults:
P1924 and P1927

Please help disabled absolutely additive system worried

Thank you! handshake

***betrescudan*** · 23-03-2017, 14:36 PM,

(23-03-2017, 12:11 PM)mariux0510 Wrote: Hello,

Please help somebody disabled additive system for this car:
Ford Focus C-MAX 2.0 TDCi 2005
ECU: Siemens SID803 5WS40166K-T 3DGC J38AC
SW: 8M51
HW: 10102989AA

FULL BDM

I try disabled faults:
P2584 Additive system MIL signal
P2585 Additive system warning lamp

1 day working perfect, but now MIL ON again
No faults in ECU, but additive system faults:
P1924 and P1927

Please help disabled absolutely additive system

Thank you!

your solution (if you want a good solution...)...and i think is better not free...
mike service yes

***mariux0510*** · 23-03-2017, 15:24 PM,

Maybe there is an easier way to disable this system for free? secret

***mariux0510*** · 23-03-2017, 22:29 PM,

How disable additive system for self? read

Maybe easier to burning this car rofl

***betrescudan*** · (This post was last modified: 24-03-2017, 05:21 AM by betrescudan.)

(23-03-2017, 22:29 PM)mariux0510 Wrote: How disable additive system for self?

Maybe easier to burning this car

write file with dpf off
disconect conector from aditiv pump
make diag and see Pcode error
now,in the file with dpf off do also dtc off
job done

***mariux0510*** · (This post was last modified: 24-03-2017, 07:58 AM by mariux0510.)

I don't have possibility to this ECU disable DPF,
but I tried to disconnect the connector from additive system,
then ECU showed fault code U0118,
but this fault code can't disable worried

***betrescudan*** · (This post was last modified: 27-03-2017, 10:43 AM by betrescudan.)

(24-03-2017, 07:57 AM)mariux0510 Wrote: I don't have possibility to this ECU disable DPF,
but I tried to disconnect the connector from additive system,
then ECU showed fault code U0118,
but this fault code can't disable

try with this

(23-03-2017, 12:11 PM)mariux0510 Wrote: Hello,

Please help somebody disabled additive system for this car:
Ford Focus C-MAX 2.0 TDCi 2005
ECU: Siemens SID803 5WS40166K-T 3DGC J38AC
SW: 8M51
HW: 10102989AA

FULL BDM

I try disabled faults:
P2584 Additive system MIL signal
P2585 Additive system warning lamp

1 day working perfect, but now MIL ON again
No faults in ECU, but additive system faults:
P1924 and P1927

Please help disabled absolutely additive system

Thank you!

nothing to loose...try this...

***mariux0510*** · 27-03-2017, 20:25 PM,

Solved problem, perfect solution thumbsup

***betrescudan*** · 28-03-2017, 06:39 AM,

thanks for report

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	2006 ford mustang 4.0L v6soch engine	hero3838	0	15	24-04-2024, 23:28 PM Last Post: hero3838
	Ford Transit courier dpf egr off	Dkgti	1	45	23-04-2024, 07:16 AM Last Post: sosinfo
	ford fiesta dtc	lebossejames	1	43	22-04-2024, 10:02 AM Last Post: nikolanik
	Ford sid208 restore org	Mariushas	3	114	21-04-2024, 20:24 PM Last Post: decode_cz
	Ford Focus MED17.0 need E2	ALEXEEVICH1988	1	47	21-04-2024, 04:26 AM Last Post: eurofix
	ford ranger 2.2 sid209 adblue off dpf off	konstantin	2	79	18-04-2024, 17:47 PM Last Post: konstantin
	Ford Focus DCM6.1 DTC OFF	mialczek	1	67	18-04-2024, 13:53 PM Last Post: rece1p23
	ford mondeo egr off	al70	3	97	18-04-2024, 10:45 AM Last Post: al70
	Ford Focus P0036 DTC OFF	ixv	2	78	17-04-2024, 20:26 PM Last Post: ixv
	ford mondeo SID206 egr off	gafari	1	80	17-04-2024, 18:43 PM Last Post: Hakhamanesh

Contact Us