Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Icom next and ista-p 3.61 problem
15-03-2017, 15:02 PM,
Post: #1
|
|||
|
|||
Icom next and ista-p 3.61 problem
Hi all
I have used ista-p for a long time together with beemerboy loader without problems. From version 3.61 I have to type the IP address from my icon next manually to connect it to Ista-p Does any of you have the same problem? Don't forget to press and , if my post helped you.
|
|||
15-03-2017, 18:04 PM,
Post: #2
|
|||
|
|||
RE: Icom next and ista-p 3.61 problem
(15-03-2017, 15:02 PM)mjuhl2003 Wrote: Hi all Sometimes happens . i have had to do the same before . |
|||
15-03-2017, 20:58 PM,
Post: #3
|
|||
|
|||
RE: Icom next and ista-p 3.61 problem
Maybe not that many using the Icom Next yet?
Don't forget to press and , if my post helped you.
|
|||
21-03-2017, 19:05 PM,
Post: #4
|
|||
|
|||
RE: Icom next and ista-p 3.61 problem
|
|||
22-03-2017, 15:08 PM,
Post: #5
|
|||
|
|||
RE: Icom next and ista-p 3.61 problem
No problem ISTA-P 3.61.1+ICOM NEXT!
|
|||
23-03-2017, 15:34 PM,
Post: #6
|
|||
|
|||
RE: Icom next and ista-p 3.61 problem
(21-03-2017, 19:05 PM)zfrepairtm Wrote:(15-03-2017, 20:58 PM)mjuhl2003 Wrote: Maybe not that many using the Icom Next yet? deactivate and then activate LAN connection in network connection manager in windows. Then wait a few seconds and try again with IToolRadar Hit Thanks and Reputation button if this post helped you.
|
|||
24-03-2017, 13:38 PM,
Post: #7
|
|||
|
|||
RE: Icom next and ista-p 3.61 problem
(23-03-2017, 15:34 PM)KaiO Wrote:(21-03-2017, 19:05 PM)zfrepairtm Wrote:(15-03-2017, 20:58 PM)mjuhl2003 Wrote: Maybe not that many using the Icom Next yet? does anybody knows the expert password for ista programing ? I have ista P version 3.61 installed and I am wondering what this mode expert do ? |
|||
26-03-2017, 19:17 PM,
(This post was last modified: 26-03-2017, 19:19 PM by KaiO.)
Post: #8
|
|||
|
|||
RE: Icom next and ista-p 3.61 problem
Expert mode allows you to program single ECUs. So you are not forced to execute measuring plan in ISTA P
Hit Thanks and Reputation button if this post helped you.
|
|||
26-03-2017, 19:53 PM,
Post: #9
|
|||
|
|||
RE: Icom next and ista-p 3.61 problem
This is not true,
There are exceptions, some drivers can not be removed from the upgrade plan, I was there with DDE7 and KOMB87 in e91 ISTA P These two drivers can not be removed, Temporarily disappearing, Uncheck the option to remove all activities, But when data is added again, ICOM A + B If my post helped you hit the thanks and reputation button!
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content