[chong5195]

Anyone using xprog 5.60..i clear atmega64 some time can some time cannot.. Write project alway cannot finish.. I write xprog 5.5.5dump..to my another xprog device.. Very head pain.. For this 5.60..any idea very one

Sent from my vivo 1601 using Tapatalk

---

Alway write half way show device silent

Sent from my vivo 1601 using Tapatalk

[zgjana]

Hi, do you have the v5,60 firmware , eeprom and the fuse config too ? if you have these files please share a link with me, i need that firmware too

[chong5195]

Hi, do you have the v5,60 firmware , eeprom and the fuse config too ? if you have these files please share a link with me, i need that firmware too

sorry mate i only has 5.5.5 or 5.5.0 fireware eeprom flash..

[domelec]

Hi, do you have the v5,60 firmware , eeprom and the fuse config too ? if you have these files please share a link with me, i need that firmware too

do you see him say 5.60 dumps? i read 555 dumps.

@chong5195
try and put power to the xprog you are reflashing
then click program

[raffy haddad]

I had that problem before with update to 551
The original atmega burned i ordeted new one and waited for a month to arrive and after programming it another mcu ( the lattice ) next atmega burned
A reputable member here advise me to
Buy a usb avr programmer specially
For the atmega and its price is about 7 $
Use that programmer
And sometimes the atmega die when you attempt to program it
And also a lot of xprog arrive do not function good
And last if i may suggest you
Buy original programmer that way you sleep and dream sweet dreams

[chong5195]

Hi, do you have the v5,60 firmware , eeprom and the fuse config too ? if you have these files please share a link with me, i need that firmware too

hello mate u aready has firmware and flash for 5.6.0 with dongle .. pls share pls