Advanced Search
Hello There, Guest! Login — Register
Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Do you prefer "Ediabas Konfigurator" or "Easy Connect"
28-03-2017, 14:35 PM,
Post: #11
dracon Offline
Donator
******
Donators 		Posts: 108
Threads: 4
Threads: 4
Thanks Received: 82 in 35 posts
Thanks Given: 14
Joined: Jan 2014
Reputation: 24
RE: Do you prefer "Ediabas Konfigurator" or "Easy Connect"
(28-03-2017, 14:10 PM)Kentener Wrote:  EDIABAS Installation error:

Die Datei oder Assembly "Xceed.Wpf.Toolkit, Version=1.9.0.0,
Culture=neutral, PublicKeyToken=3e4669d2f30244f4" oder eine
Abhängigkeit davon wurde nicht gefunden. Das System kann die
angegebene Datei nicht finden. Fehler in Markupdatei
"ecc;component/xaml'/mainwindow.xaml".

You need an additional DLL in order for it to start. The application is built with the Xceed WPF Toolkit 1.9.0.0 for .NET so you need the DLL in the same directory as the ECC application.

Unzip and drop this DLL into the C:\EDIABAS\bin alongside the ECC application and it should start right up.


Attached Files
Xceed.Wpf.Toolkit.dll.zip
File Type: .zip
Downloaded: 197 times
Size: 228.06 KB

Reputation: +8 - M-Simon [+1] , beemered [+1] , ATC [+1] , DNK76 [+1] , ruben_17non [+1] , rabihfiras [+1] , Tech206 [+1] , DarkSide [+1]
Quote this message in a reply
[+] 21 users say Thank You to dracon for this post
29-03-2017, 00:01 AM,
Post: #12
Jumper Offline
Donator
******
Donators 		Posts: 319
Threads: 18
Threads: 18
Thanks Received: 346 in 104 posts
Thanks Given: 237
Joined: May 2015
Reputation: 141
RE: Do you prefer "Ediabas Konfigurator" or "Easy Connect"
Sorry for the delay. Now everything is complete.

best regards


Attached Files
ECC.rar
File Type: .rar
Downloaded: 277 times
Size: 877.69 KB

Reputation: +7 - hulahans [+1] , Almaretto [+1] , nino17 [+1] , ruben_17non [+1] , fumantwo [+1] , rabihfiras [+1] , Vojno [+1]
Quote this message in a reply
[+] 29 users say Thank You to Jumper for this post
29-03-2017, 01:45 AM,
Post: #13
Enabled Offline
Member
Members 		Posts: 992
Threads: 15
Threads: 15
Thanks Received: 492 in 355 posts
Thanks Given: 253
Joined: Aug 2015
Reputation: 117
RE: Do you prefer "Ediabas Konfigurator" or "Easy Connect"
(27-03-2017, 22:46 PM)myfirst1er Wrote:  With EDIABAS Configurator 2.0 I had several problems. EasyConnect is very light and sufficient. Configurator DE is also good but last update 2008. ECC-EDIABAS is the same as EasyConnect if not better.

Konfigurator is up to version 3.16, but still only in German. No real differences.

EasyConnect does not play too well with original Konfigurator .ini file, but if you use a correct .ini from EasyConnect, it's ok.
Quote this message in a reply
[+] 2 users say Thank You to Enabled for this post
29-03-2017, 06:21 AM,
Post: #14
M-Simon Offline
Donator
******
Donators 		Posts: 690
Threads: 94
Threads: 94
Thanks Received: 428 in 198 posts
Thanks Given: 961
Joined: Apr 2014
Reputation: 107
RE: Do you prefer "Ediabas Konfigurator" or "Easy Connect"
(29-03-2017, 01:45 AM)Enabled Wrote:  
(27-03-2017, 22:46 PM)myfirst1er Wrote:  With EDIABAS Configurator 2.0 I had several problems. EasyConnect is very light and sufficient. Configurator DE is also good but last update 2008. ECC-EDIABAS is the same as EasyConnect if not better.

Konfigurator is up to version 3.16, but still only in German. No real differences.

EasyConnect does not play too well with original Konfigurator .ini file, but if you use a correct .ini from EasyConnect, it's ok.

Can you please share such working INI File please?
Also copy and paste Text would be fine. Thank you!
Quote this message in a reply
29-03-2017, 17:14 PM,
Post: #15
Enabled Offline
Member
Members 		Posts: 992
Threads: 15
Threads: 15
Thanks Received: 492 in 355 posts
Thanks Given: 253
Joined: Aug 2015
Reputation: 117
RE: Do you prefer "Ediabas Konfigurator" or "Easy Connect"
Here you go. This one works for me on Konfigurator, Easy Connect, ECC, and manual edit, without any scrambling or weirdness.


Attached Files
EDIABAS.INI.txt
File Type: .txt
Downloaded: 233 times
Size: 25.69 KB

Reputation: +1 - M-Simon [+1]
Quote this message in a reply
[+] 4 users say Thank You to Enabled for this post
30-03-2017, 21:51 PM,
Post: #16
sammy3502 Offline
Member
Members 		Posts: 58
Threads: 8
Threads: 8
Thanks Received: 2 in 2 posts
Thanks Given: 33
Joined: Dec 2015
Reputation: 0
RE: Do you prefer "Ediabas Konfigurator" or "Easy Connect"
Thanks for the program but how to lock icom?
Quote this message in a reply
04-04-2017, 23:27 PM,
Post: #17
cryptocar Offline
Donator
******
Donators 		Posts: 287
Threads: 9
Threads: 9
Thanks Received: 365 in 102 posts
Thanks Given: 357
Joined: Oct 2015
Reputation: 74
RE: Do you prefer "Ediabas Konfigurator" or "Easy Connect"
(30-03-2017, 21:51 PM)sammy3502 Wrote:  Thanks for the program but how to lock icom?

Use iTool Radar to reserve the ICOM for use with EDIABAS based apps.

(x64 Version)
http://cartechnology.co.uk/showthread.php?tid=8793
If this post helped you in anyway please use the thanks and/or REP buttons down here.under Thanks!
Quote this message in a reply
[+] 1 user says Thank You to cryptocar for this post
26-08-2023, 07:39 AM,
Post: #18
Patrick11021979 Offline
Donator
******
Donators 		Posts: 299
Threads: 69
Threads: 69
Thanks Received: 73 in 37 posts
Thanks Given: 74
Joined: Aug 2014
Reputation: 12
RE: Do you prefer "Ediabas Konfigurator" or "Easy Connect"
(28-03-2017, 14:35 PM)dracon Wrote:  
(28-03-2017, 14:10 PM)Kentener Wrote:  EDIABAS Installation error:

Die Datei oder Assembly "Xceed.Wpf.Toolkit, Version=1.9.0.0,
Culture=neutral, PublicKeyToken=3e4669d2f30244f4" oder eine
Abhängigkeit davon wurde nicht gefunden. Das System kann die
angegebene Datei nicht finden. Fehler in Markupdatei
"ecc;component/xaml'/mainwindow.xaml".

You need an additional DLL in order for it to start. The application is built with the Xceed WPF Toolkit 1.9.0.0 for .NET so you need the DLL in the same directory as the ECC application.

Unzip and drop this DLL into the C:\EDIABAS\bin alongside the ECC application and it should start right up.

I installed Sedoy's standard tools, but ecc program starts but with when testing connection i get fault. (apinett32.dll installed). I looked into bin directory and its in the directory. Also installed the toolkit, but it didn't work.

Someone has the solution?
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW Solved ✔ Installation of EDIABAS Edward1968 2 226 05-04-2024, 19:03 PM
Last Post: CATAHA
XZBMW Ultimate Ediabas/ISTA+ voltage control V3 Node 322 122,777 24-03-2024, 23:45 PM
Last Post: armenh7
XZBMW RemoteENET or BU remote connect share required muskatas 3 393 26-02-2024, 07:22 AM
Last Post: muskatas
  Connect to MGU via SSH and ICOM anton.maier 1 365 02-02-2024, 04:46 AM
Last Post: VroomVroom
XZBMW how to connect icom remotely? dfb 5 578 29-01-2024, 22:24 PM
Last Post: dfb
XZBMW Easy BMW Remote anydesk tcp & Radmin VPN EcuSoftFile 2 613 09-01-2024, 19:06 PM
Last Post: ImmBoo
ZVW [Share]A Win10/11 hotspot app(connect ICOM to your laptop wireless without router) rocdeng 3 946 17-12-2023, 12:27 PM
Last Post: TheNine90
XZBMW Help with Ediabas\Ecu\*.prg RoataClaudiu 11 2,877 14-12-2023, 15:58 PM
Last Post: Pommie
  ISTA-P Loader 6.1 (EDIABAS 7.3.0 Ecu Folder Update Necessary?) tinkerman 2 357 03-12-2023, 07:43 AM
Last Post: tinkerman
  BU Remote Connect - Easy BMW Remote Coding/Diagnostics Rob@BU 58 11,522 16-11-2023, 15:09 PM
Last Post: NeRkO20

Forum Jump:


Users browsing this thread:
2 Guest(s)

Return to TopReturn to Content