Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
K-tag and china bdm100 adapters-experience
30-03-2017, 20:55 PM,
Post: #1
|
|||
|
|||
K-tag and china bdm100 adapters-experience
Hello
I need some advice from an experienced people here who allready used ktag and china bdm100 adapters for reading and writing an ecu..I read a lot of edc16 ecu(bmw,psa,vag..) with bosch bdm100 adaper and works perfect, now I would like to know more about marrelli,siemens and delphi bdm100 adapters and ktag My first qestion is MARRELLI bdm pads..from ktag and bdm100 user manuals pin1 is not at the same place If you look carefully(pictures bellow) ktag pin1 and2 is on left side where are pin11 and12 of bdm100(empty pads)? Can anybody explain this,please? Texa idc4, Renault canclip V156, PSA XS evolution 8.22, autocom, multiecuscan, OP-COM 1.64, VCDS, TOYOTA techstream, MPPS V16 eu, Digiprog3, Bmw rheingold, carprog
|
|||
31-03-2017, 04:30 AM,
Post: #2
|
|||
|
|||
RE: K-tag and china bdm100 adapters-experience
Read write pin 2
[color=#000080]ALL CHIP TUNING DPF FAP NOX EGR ADBLUE SONDA FLAPS/SWIRL THROTTLE VALVE/TVA MAF REMOVAL STARTSTOP DISABLE DTC OFF AIR BAG CLEARED ALL CAR KEY PROGRAMING, ECU EDC17 CHANGE KILOMETERS
HOW I HELP YOU GOOD DO NOT FORGET TO USE THANKS AND REP BUTTON www.quickservice.com.pl .... [email protected] |
|||
01-04-2017, 06:43 AM,
Post: #3
|
|||
|
|||
RE: K-tag and china bdm100 adapters-experience
What do you mean read,write pin2?
Nobody? Texa idc4, Renault canclip V156, PSA XS evolution 8.22, autocom, multiecuscan, OP-COM 1.64, VCDS, TOYOTA techstream, MPPS V16 eu, Digiprog3, Bmw rheingold, carprog
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content