[sebastianfernandes]

Sebastian - pls can you write the fix here as for sure can help others too - me too also

thx and cheers!

Hey Danyro
Solution is on Page 15!!!!!!!

[ClockW]

I used Sebastianfernandes' solution to update the Server as per post http://cartechnology.co.uk/showthread.ph...#pid238631 and it seemed to work. Thankyou

Get_Status (SWT DEVELOP) for 1B shows all certificates and the FSC was accepted using my VIN.

I have a new problem: The car is asking for an Activation Code. I changed the 1B FSC produced by Fstool (319 bytes) using Base64 so I had a new 1B which is 428 bytes then I used FSC Generator. My CIC will not accept the new Activation Code.. Any ideas?

CW

[intel123]

Post raw 1B file and what map you wish to activate, someone will make code already

[ClockW]

Post raw 1B file and what map you wish to activate, someone will make code already

Intel123,,

Thank you for your help. The raw 1B is attached. It is for the following map,

CIC: Europe West Premium 2017-2

When I converted it to Base64, then ran FSC Generator, my activation code is LGUE3RLPPW2LYABIAAVQ. But it does not work.

Many thanks,
CW

[sameur10]

Post raw 1B file and what map you wish to activate, someone will make code already

Intel123,,

Thank you for your help. The raw 1B is attached. It is for the following map,

CIC: Europe West Premium 2017-2

When I converted it to Base64, then ran FSC Generator, my activation code is LGUE3RLPPW2LYABIAAVQ. But it does not work.

Many thanks,
CW

Here is it hit thnx if it helps

AVDKOLEEHRXWQABIAAUQ

[ClockW]

Post raw 1B file and what map you wish to activate, someone will make code already

Intel123,,

Thank you for your help. The raw 1B is attached. It is for the following map,

CIC: Europe West Premium 2017-2

When I converted it to Base64, then ran FSC Generator, my activation code is LGUE3RLPPW2LYABIAAVQ. But it does not work.

Many thanks,
CW

Here is it hit thnx if it helps

AVDKOLEEHRXWQABIAAUQ

I figured it out GLDC6HQD4YZZOABIAD7Q

I used a new FSC Generator provided by AKnight720: http://cartechnology.co.uk/showthread.ph...#pid201702 . His FSC Generator gave different activation codes and they worked His generator also accepts raw 1B codes, no need to convert them with Base64

Thank to all who helped, Intel123, Sebastianfernandes and Sameur10 , and to all those who provide the software, Intel123 and AKnight720, and know how .

CW

[larrybml]

Hello, and first, many thanks for the work.
Can someone help me with some errors?
I have an F10 with retrofited CIC, and I wanted to do my own FSC's .
I could apply the scritp, CIC virginized, I open ESYS and edit FSC's, changed VIN, and signed them with fscs.der from PRIVATEKEY, then I loaded fscs.der from 02_CERTS to Esys/ settings/ FSC/ Cerificate, then I go to Comfort mode/ FSC , loaded fsc (already signed), loaded FA, and hit Upgrade FSC.
Some of them worked from start, but 00190001.fsc , 001B0001.fsc and 00170001.fsc are not accepted.
Now I have :
0x17
FSCStatus : Rejected
FSCCertStatus : accepted
0x19
FSCStatus : Rejected
FSCCertStatus : accepted
0x1B
FSCStatus : Rejected
FSCCertStatus : accepted
0x28
FSCStatus : Rejected
FSCCertStatus : not available
0x6F
FSCStatus : accpted
FSCCertStatus : accepted
0x9C
FSCStatus : accpted
FSCCertStatus : accepted
0x9B
FSCStatus : accpted
FSCCertStatus : accepted

So, what I did so far, I think that I did it right, because some of the FSC's are accepted, but what about the others? Where I'm doing wrong? Or what is the solution? All I can see in the thread was PM sent, so nowhere a real solution. Please help!!!

I just flashed again CIC, now another problem, USB patch doesn't apply any more, I mean that I insert the USB with copie_scr.sh and CIC doesn't reboot anymore.
In this moment I started flashing again CIC.
As my car never had navigation, it doesn't had ethernet connection from CIC to ZGW, I did the wiring and I think is working because CIC is flashed in 51 min, but I still can not access it via telnet or ftp to see if there are old FSC's still there.
So please intel123 do a USB solution for us, the ones with problems, USB solution for automatic delete old FSC's and install signed ones. I can sign them with Esys and your files, but could not load them.

Thank you very much in advance and help you will help us all.

[ClockW]

Larry,

If your CIC did flash on the second attempt with the USB stick it means the first flash worked. Intel123's script will not apply the flash again if it was successful the first time.

Please note I used FSTool as I have an E70, so this may be sightly different to ESys.

For each FSC I always loaded my modified FSC into FSTool then did the following:

1. I set Apple.Nr = the FSC I want to upload (i,e Apple.Nr. =17 if I was applying 17, Apple.Nr. =19 if I was applying 19)
2. I modified my FSC templates with my VIN then I set up fstool to use my VIN
3. I ensured the path to the Sig certificate , Root certificate and FSC certificate is correct
4. I ensured the enabling code path points to the FSC folder where I stored my modified FSCs
5. Executed Store SIG_Cert
6. Executed Check SIG_Cert
7. Executed Store FSCS_Cert
8. Executed Check FSCS_Cert
9. Executed Store FSC_Cert
10. Executed Check FSCS_Cert

I then restarted my CIC before I begun loading the next FSC

I hope this helps.

Best regards

CW

[larrybml]

Thank you for your answer ClockW,
But USB stick was applied first time, because CIC was already at the latest firmware, after flashing it again, USB stick doesn't want anymore to be applied, I mean it doesn't do anything when it is connected, and I can't load FSC's, not even the ones that worked at the first try (9C,9B,6F).
I don't have an working FSTOOL and I prefer Esys because it is simple. But I don't understand if I'm doing something wrong, or something else is not good.

[ClockW]

Thank you for your answer ClockW,
But USB stick was applied first time, because CIC was already at the latest firmware, after flashing it again, USB stick doesn't want anymore to be applied, I mean it doesn't do anything when it is connected, and I can't load FSC's, not even the ones that worked at the first try (9C,9B,6F).
I don't have an working FSTOOL and I prefer Esys because it is simple. But I don't understand if I'm doing something wrong, or something else is not good.

Larry, I changed my post and added more information.

I may be wrong, but I think if you flash your CIC, it only changes the flash chip contents. I do not think it changes anything on your harddrive. My understanding is that Intel123's script and FSC codes are only applied to the data on your harddrive. However, Intel123 is the expert on this, so I would always listen to his advice first.

CW