[raduandrei82]

When you use store Sigcert also add check Sigcert in the tab and execute
later add Storefsc and CheckFsc in the tab and execute.
do this for all 17,19,1B
Edit:: Correct order of doing this
1TORE SIGCERT
2:CHECK SIGCERT
3TORE FSCSCERT
4:CHECK FSCSCERT
5TOREFSC
6:CHECKFSC

I did all these commands , but like i said, CHECK commands fail everytime no matter the job executed. STORE works for every command, i can see the SIGS, FSCS certs and fSC "loaded" but not activated.

I will try to updated DATEN and SGDAT folders of carserver with the newest SP daten i have now (v60) and use the carserver from FSTOOL thread, but i doubt this is the problem.

Ideally, intel's patch should virginize the CIC if i am right so this should work. On another russian site i've seen that the guys there first virginized the CIC by zeroing hbdata debug files and putting an OEM SWT controller file and after that running the patch.

First step is to store_sigs_cert, which works for me but when i CHECK_SIG_CERT i get an error.

I will try today with the newer setup and LOG_ALL enabled in carserver to see what i can make out of it.