[outubro]

Good evening

I tested the pen in my cic E90 reboot but the navigation is not active.
However I have already tested on E60 CIC everything works fine.
OUTUBRO

[Jurii]

Thanks for the tut and datas.

Does this also activate the voice control and if not what else is to do that it still works without can filter.

Cheers,
Jurii

[Loliceman]

Thanks for the tut and datas.

Does this also activate the voice control and if not what else is to do that it still works without can filter.

Cheers,
Jurii

The script activation will only activate the FSC already inside your cic. So if yours contain FSC for voice activation, this will activate it. If not, then this won't.

This script works the same as a can filter, but in software and not with hardware.

If you want to make your own certs for any cic, I recommend you try Swtpatcher v2 by Intel123

[eng.mood]

I dont hv usb in glove box , can i use CD? and how

[Alex Coop]

HI guys, I have a question after reading all the thread i didn t find anything definitory about this. Can I use this script on a usb to activate new maps for a retrofitted cic(E90)?
If not could you tell me to the procedure or refer to a post? Thank you!

[smercki]

Hi
Someone can shared file, link mega dont work
thank you

[Twoone]

Hi
Someone can shared file, link mega dont work
thank you

Here you go. (thanks to INTEL 123)

[smercki]

Hi
Someone can shared file, link mega dont work
thank you

Here you go. (thanks to INTEL 123)

thank you intel 123
and thank you Twoone

[Nixer]

What version of CiC software is needed for this to work?
I have a 2011 E92 M3 CiC retrofitted on my 2008 E92 335i. I'm trying to activate NAV and voice control. Navigation is grayed out right now... when I tried this script, nothing really happened... does it mean I have an older CiC sw?

[Nixer]

I got my USB to Eth adapter today and looked at the files. I see the script copied /mnt/HBPersistence/copie_scr.sh and another script... However after the reboot I only see just one file created and navigation gets deactivated again!
00170001.swt

Shouldn't I be getting 5 files in total created? When I manually run the script via telnet I see these 5 files created.
00170001.swt
00180001.swt
00190001.swt
001A0001.swt
001B0001.swt

I also tried by creating /mnt/HBpersistence/enable_fsc.sh and adding an entry in netinit.sh or startl6sss.sh...neither worked. What am I missing here? Anyone had similar issue?