Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

E65 745i 2002 alternator problem?
14-04-2017, 15:04 PM,
Post: #1
XZBMW  E65 745i 2002 alternator problem?
I had problems with my alternator and after rebuilding the alternator the car wont recognize it. It still charges but i get error message Alternator Fault. The alternator is Bosch 12317526286 water cooled. All they did is replace the voltage regulator. Original voltage regularot was Bosch F 00M 255 207 and the replacement one is Mobiletron VR-B5204. Does the car need some sort of coding for the replacement? It seem like there is no communication between the alternator and DME. I get Error Code 28D7 "Alternator Communication ".
Quote this message in a reply
14-04-2017, 21:08 PM,
Post: #2
RE: E65 745i 2002 alternator problem?
Is charging work normally? couse i seen a lot of cars with this error and ofcourse after rebuilding it and they worked normally, make sure also if your battery registered to system with right battery capacity
Quote this message in a reply
15-04-2017, 19:07 PM,
Post: #3
RE: E65 745i 2002 alternator problem?
(14-04-2017, 21:08 PM)Silva1337 Wrote:  Is charging work normally? couse i seen a lot of cars with this error and ofcourse after rebuilding it and they worked normally, make sure also if your battery registered to system with right battery capacity

I have replaced the battery too. Bought an 90AH AGM battery and registered with ISTA. Car now works with unpluged cable that goes to the voltage regulator( i think it is BSD line) there is no error message and it is charging 14V but the problem is that AGM battery need different charging pattern. I think DME comunicates with the alternator over this BSD line and it can make the alternator stop charging the battery completely. This is because it is bad for the AGM batteries to be overcharged. The point is that car charges AGM batteries differently than normal battery and with no BSD communication this is not possible. So with unpluged BSD i get no error message and car charges around 14V but it doesn't charge the battery with AGM pattern. I need to know if there is a way to fix this BSD line communication.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW Bmw 5,f10 radio problem RobertRexhaj 3 72 3 hours ago
Last Post: Unspec
  ISTA launcher problem Red_bean_bun 1 157 26-03-2024, 05:11 AM
Last Post: 2013m5
  Dme Cas synchronization Problem donjuan020 3 203 25-03-2024, 21:55 PM
Last Post: BmwMerc
  BMW e39 530d 2001 problem after MAF change boweld11 3 103 24-03-2024, 22:44 PM
Last Post: SkeYT
XZBMW Entrynav2 Maps Problem Chillmeister 3 286 24-03-2024, 17:18 PM
Last Post: Chillmeister
  For anyone having problem with ICOM NEXT FW update via ISTA+. ImmBoo 16 3,900 24-03-2024, 11:29 AM
Last Post: Twointje
  Battery lead positive underfloor problem da.2022 10 196 24-03-2024, 09:38 AM
Last Post: pupu144
  Problem Retrofit electrified steering column on the G31 LCI smercki 12 331 22-03-2024, 12:55 PM
Last Post: Node
XZBMW X5 G05 with MGU and ATM: GPS problem david357 8 786 19-03-2024, 21:25 PM
Last Post: Mwahab
  Bmw G31 retrofit Mgu id7 atm problem intranet 14 1,875 19-03-2024, 10:07 AM
Last Post: evaldazj

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content