[SkeYT]

I dont think so. Different GW for E60/E70 and E89 when you flash it so there must be inside flash files. I extracted working bootloader but i dont know where put main program and data program inside dump. There must be some solution for this or anyone have dump....I have fully extracted eeprom form E and F series.

[Doiko]

Hi. Im trying to flash V850 with build firmware from spdaten in F series CIC to get GW worked with E series but CIC is in boot mode (max fan rpm) and no communication on can and most. Doiko when you use vercitical board from F series CIC run? Or you must flash it to fully worked? Maybe someone have worked v850 dump to get can communication or most???

Vercitical board starts but also needs to be flashed

[pRoxxxDD]

I dont think so. Different GW for E60/E70 and E89 when you flash it so there must be inside flash files. I extracted working bootloader but i dont know where put main program and data program inside dump. There must be some solution for this or anyone have dump....I have fully extracted eeprom form E and F series.

You could think whatever you want, but it will not change reality. These units reversed in all ways, and there even exists mappings for v850 that describe where and what is stored, and as I said previously there is no GW table in SP-Daten, so it will not work until you get somewhere somehow full v850 dump from E series(which are locked btw). And yeah app/bolo may be different for E70/e90 or whatever, but the factory GW table is not.

[SkeYT]

However, I managed to change reality. I confirm the launch of the fully converted F series to E series CIC unit. Everything worked. The unit does not restart itself as volaltd said. Regards from Poland.