Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
[Solved]How to modify .BIN files from flash
20-04-2017, 22:40 PM,
(This post was last modified: 16-05-2017, 13:07 PM by crapplefags.)
Post: #1
|
|||
|
|||
[Solved]How to modify .BIN files from flash
Hi to all,
let me explain it better: I tried an ecu update, but it finished bad after the random disconnections of the alliance can clip erased the flash and something into the eeprom was corrupted or missing. the immo light was on and the engine didn't started. I desoldered and backuped the 29f400 with a programmer, but when I open it with a hex editor I see a lot of not so human readable characters and I'm clueless on what parts I need to edit to recover my file. so I was asking myself... is there a way to decode it somehow? Thank you |
|||
20-04-2017, 23:07 PM,
Post: #2
|
|||
|
|||
RE: How to modify .BIN files from flash
I would say for the 'right' person to help you in this situation, you would need to post the exact ECU, year model, and model of vehicle you are attempting to work on.
some here are BMW only, and some GM only.. you get my meaning? you are going to see alot of ASCII and Hex inside a binary file. Some are easy to understand and some are not very well laid out in structure. |
|||
21-04-2017, 12:01 PM,
Post: #3
|
|||
|
|||
RE: How to modify .BIN files from flash
You're right.
the car it's a 2004 Renault Clio 1.4 16v 98hp k4j engine with siemens ems 3134 - 8200326741 - s118301122B ecu. comparing my backuped bin with one tooked from another car there are some small differences, but I can't understand what those strings stands for. |
|||
21-04-2017, 14:51 PM,
Post: #4
|
|||
|
|||
RE: How to modify .BIN files from flash
Read eeprom read flash Send what you read
[color=#000080]ALL CHIP TUNING DPF FAP NOX EGR ADBLUE SONDA FLAPS/SWIRL THROTTLE VALVE/TVA MAF REMOVAL STARTSTOP DISABLE DTC OFF AIR BAG CLEARED ALL CAR KEY PROGRAMING, ECU EDC17 CHANGE KILOMETERS
HOW I HELP YOU GOOD DO NOT FORGET TO USE THANKS AND REP BUTTON www.quickservice.com.pl .... [email protected] |
|||
22-04-2017, 21:59 PM,
Post: #5
|
|||
|
|||
RE: How to modify .BIN files from flash
Here you go https://www.dropbox.com/s/wdsni33a77nuz8...p_orig.rar
please tell me if you can retrieve something useful thanks |
|||
23-04-2017, 09:33 AM,
Post: #6
|
|||
|
|||
RE: How to modify .BIN files from flash
Did you read this backup before you did anything to the car?
if my post helps please give Reputation and Thanks
|
|||
Reputation: +1 - kikis [+1] | |||
23-04-2017, 16:33 PM,
Post: #7
|
|||
|
|||
RE: How to modify .BIN files from flash
The backup was made after the car refused to start. the problem was due to a can clip reprog stopped at 13% (alliance sonde random disconnections) and no way to recover it, even with the an2135sc based sonde because all identification numbers were zeroes. that's why I'm searching for a way to make the bin readable, replace zeroes with proper numbers and recover it as it was before.
|
|||
23-04-2017, 20:07 PM,
Post: #8
|
|||
|
|||
RE: How to modify .BIN files from flash
Hi . Just load this file into Ecu
Switch ignition on ,wait for immo light to switch off and start the car.. Regards |