[firas]

Hi
i have a big problem with
VW passat cc
comfort module orig with corrupted file 95320
i find other comfort module
can same one help me to change CS+PIN+Power class+MAC1-2 +ELV mac



i have a example:

(xx) - Sample
$xxx – Data from the address xxx

Var
Pin , Xor1, Xor2, Lxor3, Hxor4, Lmac1, Hmac1, Lmac2, Hmac2, CS10x, PoClas

Const
St = FF

XOR
Xor1 = $5FE( 71 )
Xor2 = $5FF( 8D )
Lxor3 = $507( 3F ) xor St( FF ) = 3F xor FF = C0
Hxor4 = ?

PIN
Pin = $4A1( 84 ) $4A2( FB ) xor Lxor3( C0 ) Lxor3( C0 ) = 84FB xor C0C0 = hex ( 443B )

= dec ( 17467 )

Pin= 17467
---------
Power class
PoClas = $50E( 73 ) xor Xor2( 8D ) = 73 xor 8D = FE

Power Class = FE
---------
CS Bytes
CS10-1 = $4AE( F6 ) xor Lxor3( C0 ) = F6 xor C0 = 36
CS10-2 = $4A8( 2E ) xor Lxor3( C0 ) = 2E xor C0 = EE
CS10-3 = $4AC( 36 ) xor Lxor3( C0 ) = 36 xor C0 = F6
CS10-4= $4AD( B4 ) xor Hxor4(?) = ?
CS10-5= $4B1( 0D ) xor Hxor4(?) = ?
CS10-6= $4A9( BD ) xor Hxor4(?) = ?
CS10-7= $4B0( 2D ) xor Lxor3( C0 ) = 2D xor C0 = ED
CS10-8= $4AA( 64 ) xor Lxor3( C0 ) = 64 xor C0 = A4
CS10-9= $4AB( 13 ) xor Hxor4(?) = ?
CS10-10= $4AF( 69 ) xor Hxor4(?) = ?

CS Bytes = 36 EE F6 ? ? ? ED A4 ? ?
---------
MAC1-2
Lmac1=$4C7( 0E ) xor Hxor(?) = ?
Hmac1=$4C6( D2 ) xor Lxor3( C0 ) = D2 xor C0 = 12
Lmac2=$4CF( 38 ) xor Lxor3( C0 ) = 38 xor C0 = F8
Hmac2=$4D0( 6F ) xor Hxor4(?) = ?

MAC1-2 = ? 12 F8 ?
---------
ELV mac
Emac1=$4FE( 79 ) xor Lxor3( C0 ) = 79 xor C0 = B9
Emac2=$4FD( 90 ) xor Hxor4(?) = ?

ELV mac = B9 ?


thanks

[firas]

I know pin and cs of the both of comfort module
i need the file of new comfort module withe old cs+pin+power class+mac1-2+mak elv

[doordie40]

Only now immo off fix u problems dont lose u time

[senatormog]

Only now immo off fix u problems dont lose u time

how to make an imo off in a comfort block? I experiment with the crossing of an elephant with a rhinoceros (golf 5 plus and a comfort block from the passat b6) for the sake of the appearance of the comfort menu on the bk without replacing the block of the central eletroncnica. I use fvdi

[eltiobarbas]

Only now immo off fix u problems dont lose u time

how to make an imo off in a comfort block? I experiment with the crossing of an elephant with a rhinoceros (golf 5 plus and a comfort block from the passat b6) for the sake of the appearance of the comfort menu on the bk without replacing the block of the central eletroncnica. I use fvdi

Test This eeproms..One its transfer all the immo data, the others are virgin (Multiples versions).
Regards

[senatormog]

Only now immo off fix u problems dont lose u time

how to make an imo off in a comfort block? I experiment with the crossing of an elephant with a rhinoceros (golf 5 plus and a comfort block from the passat b6) for the sake of the appearance of the comfort menu on the bk without replacing the block of the central eletroncnica. I use fvdi

Test This eeproms..One its transfer all the immo data, the others are virgin (Multiples versions).
Regards

Tell me please, and your dumps are pure without IMMO data? since all dumps have wines and pins, But cs is not readable because there is no engine dump ...... I would like to disconnect just like it was done in the same blocks from the golf 1k0 unfortunately I could not find the dumps of such a block 1k0 959433ar

[eltiobarbas]

I only transfer the immo data (All the data VIN,PIN,MAC,ELV,KEYS,CS, etc...) from OLD Eeprom to NEW Eeprom like you ask, and then I apply a few Virgin options in this NEW transfer eeprom.

[senatormog]

I only transfer the immo data (All the data VIN,PIN,MAC,ELV,KEYS,CS, etc...) from OLD Eeprom to NEW Eeprom like you ask, and then I apply a few Virgin options in this NEW transfer eeprom.

strange, but I compare all three "clean" dumps with a dump "transfer" and everywhere the difference is only in one line ... ie. all the data on the site of their same shows your wines a series of immo and pin. I understand that in a pure dump should be either ff or xx. or is this line an IMMO switch off?

[doordie40]

Send me dump for ECU is bosh med 17.5 and after i wall send to u immo off files to run u car

---

u can use vvdi2 to adpet new or use comfort module